现行

JJG(交通) 133-2017

落锤式弯沉仪
Falling Weight Deflectometer

2017-04-12

现行

BS CWA 15846-2008

Measuring method for dynamic compactness and bearing capacity with SP-LFWD (small-plate light falling weight deflectometer)
SP-LFWD（小板轻型落锤式弯沉仪）测定动压实度和承载力的方法

2008-06-01

现行

ASTM E2583-07(2020)

Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)
用轻量偏转仪测量偏转的标准测试方法（LWD）

2020-11-01

现行

JJF 1445-2014

落锤式冲击试验机校准规范
Calibration Specification for Falling Weight Impact Testing Machines

2014-01-23

现行

ASTM E3331-22a

Standard Test Method for Measuring Target Modulus Using Light Weight Deflectometer (LWD) on Compacted Proctor Mold Samples
用轻型挠度计（LWD）在压实的普氏模具样品上测量目标模量的标准试验方法

2022-11-01

现行

KS F 2379

낙하식 충격 하중 장치에 의한 변형 측정방법
落锤式冲击加载装置挠度试验方法

2017-08-14

现行

KS F 2379(2022 Confirm)

낙하식 충격 하중 장치에 의한 변형 측정방법
落锤式冲击载荷装置挠度试验方法

2017-08-14

现行

JIS K 7211-1976

General rules for testing impact strength of rigid plastics by the falling weight method
用落锤法测试硬质塑料冲击强度的一般规则

1976-01-01

现行

ASTM G14-04(2024)

Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
管道涂层抗冲击性的标准试验方法（落锤试验）

2024-07-01

现行

ASTM D4694-09(2020)

Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device
具有下降式冲击负载装置的偏转的标准测试方法

2020-11-01

现行

GB/T 14153-1993

硬质塑料落锤冲击试验方法 通则
General test method for impact resistance of rigid plastics by means of falling weight

1993-02-15

现行

GOST 33496-2015

Композиты полимерные. Метод испытания на сопротивление повреждению при ударе падающим грузом
聚合物复合材料 在跌落重量冲击下测试耐损伤性的方法

2015-09-29

现行

JB/T 9389-2008

非金属材料落锤式冲击试验机 技术条件
Specification for falling weight impact testing machines used for non-metallic materials

2008-03-12

现行

ASTM F736-17(2023)

Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
用落锤法测定整体聚碳酸酯板抗冲击性的标准试验方法

2023-01-01

现行

GB/T 11548-1989

硬质塑料板材耐冲击性能试验方法 （落锤法）
Standard test method for impact resistance of rigid plastic sheeting by means of a tup (falling weight)

1989-07-19

现行

ASTM D2444-21

Standard Practice for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
通过Tup（跌落重量）法测定热塑性塑料管和配件的抗冲击性的标准实施规程

2021-02-01

现行

BS ISO 6272-2-2002

Paints and varnishes. Rapid deformation (impact resistance) tests. Falling weight test, small-area indenter
油漆和清漆 快速变形（抗冲击）试验 落锤试验 小面积压头

2003-05-07

现行

BS EN ISO 6272-2-2011

Paints and varnishes. Rapid-deformation (impact resistance) tests-Falling-weight test, small-area indenter
油漆和清漆 快速变形（抗冲击）试验

2011-08-31

现行

BS EN ISO 6272-1-2011

Paints and varnishes. Rapid-deformation (impact resistance) tests-Falling-weight test, large-area indenter
油漆和清漆 快速变形（抗冲击）试验

2011-08-31

现行

JIS K 5600-5-3-1999

Testing methods for paints -- Part 5: Mechanical property of film -- Section 3: Falling-weight test
涂料试验方法第5部分:漆膜机械性能第3节:落锤试验

1999-01-01