BS ISO 16332:2018规定了定义和简化条件下的油水分离器对比试验 实验室条件。本试验适用于压力侧燃油/水分离器以及吸入侧燃油/水分离器 分离器。压力侧燃油/水分离器使用细液滴和吸入侧过滤器进行测试 使用相同的试验台布局，使用粗液滴进行试验。根据协议，额定流量（以升/小时为单位）应在50升/小时和1500升/小时之间 在客户和油水分离器制造商之间，经过一些修改 程序可用于流速较高或较低的燃油/水分离器。交叉引用:ASTM D4176-04（2009）ISO 1219-1ISO 6889ISO 12937ISO 9101ISO 13320ISO 3968ISO 80000-1ISO 3722购买本文件时可获得的所有现行修订均包含在购买本文件中。

BS ISO 16332:2018 specifies a fuel/water separator comparison test under defined and simplified laboratory conditions.This test is intended for pressure side fuel/water separators as well as for suction side fuel/water separators. Pressure side fuel/water separators are tested with fine droplets and suction side filters are tested with coarse droplets using the same test rig layout.The rated flow (in litres per hour) is intended for the range between 50 l/h and 1 500 l/h. By agreement between customer and fuel/water separator manufacturer, and with some modifications, the procedures can be used for fuel/water separators with higher or lower flow rates.Cross References:ASTM D4176 - 04(2009)ISO 1219-1ISO 6889ISO 12937ISO 9101ISO 13320ISO 3968ISO 80000-1ISO 3722All current amendments available at time of purchase are included with the purchase of this document.