1.1 本试验方法包括测定润滑液的雾化特性。 注1: 本试验方法不应用于评估含有固体添加剂（如石墨）的流体。 1.2 以国际单位制表示的数值应视为标准值。 1.2.1 英寸-磅单位用于描述中所示的各种管件 图1 . 1.2.2 英寸-磅螺纹如所示 图2 . 1.3 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 有关具体的警告声明，请参阅第节 7. 和 8. . 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 5.1 本试验为评估工业雾润滑系统中使用的油的雾特性提供了指南。该测试与服务性能之间的相关性程度尚未完全确定。

1.1 This test method covers the determination of the misting characteristics of lubricating fluids. Note 1: This test method should not be used to evaluate fluids containing solid additives such as graphite. 1.2 The values stated in SI units are to be regarded as standard. 1.2.1 Inch-pound units are used to describe the various tube fittings shown in Fig. 1 . 1.2.2 Inch-pound thread is shown in Fig. 2 . 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. For specific warning statements, see Sections 7 and 8 . 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 5.1 This test provides a guide for evaluating the misting characteristics of oils for use in industrial mist lubrication systems. The degree of correlation between this test and service performance has not been fully determined.