1.1 本试验方法涵盖了金属材料暴露于高压气态氢气时对氢脆敏感性的定量测定。 1.2 以SI单位表示的值应被视为标准。括号中给出的值仅供参考。 1.3 本标准并不旨在解决与其使用相关的所有安全性问题（如果有）。本标准的使用者有责任在使用前建立适当的安全、健康和环境实践并确定法规限制的适用性。 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。======意义和用途====== 4.1 该测试方法将为高压氢气中应用的金属材料的选择提供指导。 4.2 P的值 他 /P H2 比率将是预期在氢中机械性能降解严重程度的相对指示。

1.1 This test method covers the quantitative determination of the susceptibility of metallic materials to hydrogen embrittlement, when exposed to high pressure gaseous hydrogen. 1.2 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 This test method will provide a guide for the choice of metallic materials for applications in high pressure hydrogen gas. 4.2 The value of the P He /P H2 ratio will be a relative indication of the severity of degradation of the mechanical properties to be expected in hydrogen.