首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
历史 ASTM E883-11(2017)
到馆提醒
收藏跟踪
购买正版
Standard Guide for Reflected–Light Photomicrography 反射式和#x2013的标准指南;光显微摄影术
发布日期: 2017-06-01
1.1 本指南概述了使用反射光显微镜拍摄金属和材料时可能遵循的各种方法。包括使用直接快速和湿法制备黑白和彩色印刷品和透明胶片的方法。 1.2 建议使用指南生成典型受试者的显微照片,并尽可能生成非典型受试者的显微照片。包括有关增强显示特定材料特征的技术的信息。必要时提供描述性材料,以澄清程序。 在详细描述可能有帮助的地方引用了参考文献。 1.3 本标准并非旨在解决与其使用相关的所有安全问题(如有)。本标准的用户有责任在使用前制定适当的安全和健康实践,并确定监管要求的适用性。 具体预防说明见 X1.7 . 1.4 各节按以下顺序显示: 参考文件 2. 术语 3. 意义和用途 4. 放大倍数 5. 显微照片的复制 6. 光学系统 7. 照明源 8. 试样照明 9 聚焦 10 显微照相滤光片 11 照明技术 12 即时处理胶片 13 摄影材料 14 照相曝光 15 照相处理 16 关键词 17 金相显微镜的视觉使用建议 附录X1 金相照片宏观照相指南 附录X2 电子摄影 附录X3 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒(TBT)委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。 ====意义和用途====== 4.1 本指南适用于金属和其他材料的显微照相和宏观照相。 4.2 还处理了照相材料的后续处理。
1.1 This guide outlines various methods which may be followed in the photography of metals and materials with the reflected-light microscope. Methods are included for preparation of prints and transparencies in black-and-white and in color, using both direct rapid and wet processes. 1.2 Guidelines are suggested to yield photomicrographs of typical subjects and, to the extent possible, of atypical subjects as well. Information is included concerning techniques for the enhanced display of specific material features. Descriptive material is provided where necessary to clarify procedures. References are cited where detailed descriptions may be helpful. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory requirements prior to use. Specific precautionary statements are given in X1.7 . 1.4 The sections appear in the following order: Referenced documents 2 Terminology 3 Significance and use 4 Magnification 5 Reproduction of photomicrographs 6 Optical systems 7 Illumination sources 8 Illumination of specimens 9 Focusing 10 Filters for photomicrography 11 Illumination techniques 12 Instant-processing films 13 Photographic materials 14 Photographic exposure 15 Photographic processing 16 Keywords 17 Suggestions for visual use of metallographic microscopes Appendix X1 Guide for metallographic photomacrography Appendix X2 Electronic photography Appendix X3 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 This guide is useful for the photomicrography and photomacrography of metals and other materials. 4.2 The subsequent processing of the photographic materials is also treated.
分类信息
关联关系
研制信息
归口单位: E04.03
相似标准/计划/法规