1.1 本试验方法涵盖了在标准试样上以及在指定的制备和高温测试条件下测试时，用于粘合金属的粘合剂的相对剪切强度的测定。 1.2 本试验方法适用于315°C至850°C（600°F至1500°F）的温度范围。 1.3 以国际单位制表示的值应被视为标准。括号中给出的值仅供参考。 1.4 本标准并不旨在解决与其使用相关的所有安全问题（如果有的话）。 本标准的使用者有责任在使用前建立适当的安全、健康和环境实践，并确定监管限制的适用性。 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。 =====意义和用途====== 4.1 高温下粘合剂粘合的相对强度允许更好地选择必须在高于正常温度下工作的粘合剂。这种测试方法在提供此类信息方面很有用。

1.1 This test method covers the determination of the comparative shear strengths of adhesives for bonding metals when tested on a standard specimen and under specified conditions of preparation and testing at elevated temperatures. 1.2 This test method is applicable to the temperature range from 315 °C to 850 °C (600 °F to 1500 °F). 1.3 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 4.1 Comparative strength of adhesive bonds at elevated temperatures allows for better selection of adhesives that must perform at temperatures above normal. This test method is useful in supplying such information.