1.1 本规范涵盖了用于商业、轻型商业或住宅表面地板应用的表面光滑或浮雕的聚烯烃合成砖。 1.2 本规范涵盖了由粘合剂、填料和颜料组成的瓷砖。粘合剂应由一种或多种聚烯烃树脂、聚烯烃共聚物或聚烯烃三元共聚物（或其他合适的）或任何理想的组合组成。如果粘合剂系统的聚烯烃部分大于50%，则可以将其他合适的聚合树脂作为粘合剂的一部分。 1.3 以英寸-磅为单位的数值应视为标准值。括号中给出的值是到国际单位制的数学转换，仅供参考，不被视为标准值。 1.4 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全、健康和环境实践，并确定监管限制的适用性。 1.5 本国际标准是根据世界贸易组织技术性贸易壁垒（TBT）委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认标准化原则制定的。

1.1 This specification covers polyolefin composition tile with either smooth or embossed surfaces flooring application for use in commercial, light commercial or residential surfaces flooring application. 1.2 This specification covers a tile that shall be composed of binder, fillers and pigments. The binder shall consist of one or more resins of polyolefin, polyolefin copolymers or polyolefin ter-polymers (or other suitable), or any desirable combination. Other suitable polymeric resins may be incorporated as part of the binder provided the polyolefin portion of the binder system is greater than 50 %. 1.3 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.5 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.