IEC 60964:2018 RLV包含IEC官方国际标准及其红线版本。Redline版本不是官方文档，它只有英文版本，为您提供了一种快速简单的方法来比较IEC官方标准与其以前版本之间的所有变化。 ？ IEC 60964:2018建立了核电厂主控室人机界面的要求。该文件还建立了功能选择、设计考虑和人机界面组织的要求，以及系统用于验证和确认功能设计的程序。这些要求反映了人因工程原理的应用，因为它们适用于工厂运行状态和事故条件（包括设计基础和设计扩展条件）期间的人机界面，如IAEA SSR-2/1和原子能机构NP-T-3.16。这第三版取消并取代了2009年出版的第二版。本版构成技术修订版。与上一版相比，此版本包括以下重大技术变更: a)审查术语“任务”的使用，确保IEC 60964和IEC 61839之间的一致性； b)明确MCR支持服务的作用、功能能力、稳健性和完整性，以促进其在发生严重事故或极端外部危险时继续使用； c)审查该标准与IEC 60964:2009制定以来已发布的IAEA安全指南和IEC SC 45A标准的相关性； d)明确“任务分析”的作用和意义， e)进一步描述与衍生标准的关系（即。e.IEC 61227、IEC 61771、IEC 61772、IEC 61839、IEC 62241和其他与控制室设计相关的标准）； f)考虑其与人的因素工程原则的一致性，特别是与即将发布的原子能机构关于人的因素的安全指南(DS-492)的原则的一致性。

IEC 60964:2018 RLV contains both the official IEC International Standard and its Redline version. The Redline version is not an official document, it is available in English only and provides you with a quick and easy way to compare all the changes between the official IEC Standard and its previous edition.
？ IEC 60964:2018 establishes requirements for the human-machine interface in the main control rooms of nuclear power plants. The document also establishes requirements for the selection of functions, design consideration and organization of the human-machine interface and procedures which are used systematically to verify and validate the functional design. These requirements reflect the application of human factors engineering principles as they apply to the human-machine interface during plant operational states and accident conditions (including design basis and design extension conditions), as defined in IAEA SSR-2/1 and IAEA NP-T-3.16. This third edition cancels and replaces the second edition published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition:
a) to review the usage of the term “task” ensuring consistency between IEC 60964 and IEC 61839;
b) to clarify the role, functional capability, robustness and integrity of supporting services for the MCR to promote its continued use at the time of a severe accident or extreme external hazard;
c) to review the relevance of the standard to the IAEA safety guides and IEC SC 45A standards that have been published since IEC 60964:2009 was developed;
d) to clarify the role and meaning of “task analysis”,
e) to further delineate the relationships with derivative standards (i.e. IEC 61227, IEC 61771, IEC 61772, IEC 61839, IEC 62241 and others of relevance to the control room design);
f) to consider its alignment with the Human Factors Engineering principles, specifically with the ones of IAEA safety guide on Human Factors (DS-492) to be issued.