现行

GB/T 3103.1-2002

紧固件公差 螺栓、螺钉、螺柱和螺母
Tolerances for fasteners--Bolts，screws，studs and nuts

2002-12-05

现行

ISO 4759-1-2000

Tolerances for fasteners — Part 1: Bolts, screws, studs and nuts — Product grades A, B and C
紧固件公差第1部分:螺栓、螺钉、螺柱和螺母——产品等级A、B和C

2000-11-09

现行

JIS B 1021-2003

Tolerances for fasteners -- Part 1: Bolts, screws, studs and nuts -- Product grades A, B and C
紧固件公差第1部分:螺栓、螺钉、螺柱和螺母产品等级A、B和C

2003-01-01

现行

GOST ISO 4759-1-2015

Изделия крепежные. Допуски. Часть 1. Болты, винты, шпильки и гайки. Классы точности А, В и С
紧固件 公差 螺栓 螺钉 螺柱和螺母 产品等级A B和C

2015-09-29

现行

BS EN ISO 4759-1-2001

Tolerances for fasteners-Bolts, screws, studs and nuts. Product grades A, B and C
紧固件的公差 螺栓、螺钉、螺柱和螺母 产品等级A、B和C

2001-02-15

现行

UNE-EN ISO 4759-1-2001

Tolerances for fasteners. Part 1: Bolts, screws, studs and nuts. Product grades A, B and C. (ISO 4759-1:2000).
紧固件的公差 第1部分:螺栓、螺钉、螺柱和螺母 产品等级A、B和C（ISO 4759-1-2000）

2001-09-23

现行

KS B ISO 6157-1(2020 Confirm)

체결용 부품－표면 결함－제1부：일반용 볼트, 스크루 및 스터드
紧固件表面不连续性第1部分:一般要求用螺栓、螺钉和螺柱

2010-12-29

现行

JIS B 1041-1993

Fasteners -- Surface discontinuities -- Part 1: Bolts, screws and studs for general requirements
紧固件表面不连续性第1部分:一般要求用螺栓、螺钉和螺柱

1993-01-01

现行

GOST ISO 6157-1-2015

Изделия крепежные. Дефекты поверхности. Часть 1. Болты, винты и шпильки общего назначения
紧固件 表面不连续性螺栓 螺钉和螺柱 用于一般要求

2015-09-29

现行

ISO 6157-1-1988

Fasteners — Surface discontinuities — Part 1: Bolts, screws and studs for general requirements
紧固件——表面不连续性第1部分:一般要求用螺栓、螺钉和螺柱

1988-07-28

现行

ISO 4759-3-2016

Tolerances for fasteners — Part 3: Washers for bolts, screws and nuts — Product grades A, C and F
紧固件公差 - 螺栓 螺丝和螺母的平垫圈 - 产品等级A和C

2016-06-01

现行

AS 1237.2-2016

Tolerances for fasteners, Part 2: Washers for bolts, screws and nuts - Product grades A, C and F
紧固件公差第2部分:螺栓、螺钉和螺母用垫圈产品等级A、C和F

2016-09-07

现行

GOST ISO 4759-3-2015

Изделия крепежные. Допуски. Часть 3. Шайбы плоские для болтов, винтов и гаек. Классы точности А и С.
紧固件 公差 用于螺栓 螺丝和螺母的普通垫圈 产品等级A和C

2015-09-29

现行

JIS B 1054-1-2013

Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 1: Bolts, screws and studs
耐腐蚀不锈钢紧固件机械性能第1部分:螺栓、螺钉和螺柱

2013-01-01

现行

GB/T 41157.1-2022

核电厂用紧固件 第1部分：合金钢螺栓、螺钉和螺柱
Fasteners for nuclear power plants—Part 1：Bolts, screws and studs made of alloy steel

2022-03-09

现行

GOST ISO 3506-1-2014

Механические свойства крепежных изделий из коррозионно-стойкой нержавеющей стали. Часть 1. Болты, винты и шпильки
耐腐蚀不锈钢紧固件的机械性能 螺栓 螺钉和螺栓

2014-10-20

现行

JIS B 1022-2008

Tolerances for fasteners -- Part 3: Plain washers for bolts, screws and nuts -- Product grades A and C (FOREIGN STANDARD)
紧固件公差第3部分:螺栓、螺钉和螺母用平垫圈产品等级A和C（国外标准）

2008-01-01

现行

UNE-EN 26157-1-1992

FASTENERS. SURFACE DISCONTINUITIES. PART 1: BOLTS, SCREWS AND STUDS FOR GENERAL REQUIREMENTS. (ISO 6157-1:1988)
紧固件 表面不连续 第1部分:一般要求用螺栓、螺钉和螺柱 （ISO 6157-1-1988）

1992-12-02

现行

AS 4291.1-2015

Mechanical properties of fasteners made of carbon steel and alloy steel, Part 1: Bolts, screws and studs
碳钢和合金钢制紧固件的机械性能第1部分:螺栓、螺钉和螺柱

2015-08-26

现行

ISO 3506-1-2020

Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 1: Bolts, screws and studs with specified grades and property classes
紧固件耐腐蚀不锈钢紧固件的机械性能第1部分:规定等级和性能等级的螺栓、螺钉和螺柱

2020-04-02