BS EN 10028-1:2017规定了本项目扁平产品的一般技术交付条件 建造压力设备。EN 10021中的一般技术交付条件也适用。注:一旦本欧洲标准根据指令发布在欧盟官方公报（OJEU）上 2014/68/EU，符合指令2014/68/EU的基本安全要求（ESRs）的推定为: 仅限于本欧洲标准中材料的技术数据（第1部分和本系列的其他相关部分） 并且不假定材料适用于特定的设备项目。因此，评估 本材料标准中所述的技术数据与本工程特定项目的设计要求不符 需要使用设备验证是否满足指令2014/68/EU的ESR。交叉引用:EN 10021:2006ISO 6892-2:2011 Ed 1EN 10163-2:2004EN ISO 2566-1（采用ISO 2566-1:1984）ISO 9445-1:2009 Ed 1EN ISO 9444-2（ISO 9444-2:2009）ASEN 10079:2007EN 10028-5:2017EN ISO 6892-2（ISO 6892-2:2011）ASEN 10168:2004CEN/TR 10261:2013ISO 3651-2:1998EN ISO 9445-2（ISO 9445-2:2009）ASEN 10160:1999ISO 2566-1982:1996EN ISO 148:19963651-2:1998（F）EN 10029:2010EN 10051: 2009年12月2:7 7.7 7.4.4 4.4.4.4.4.4.4.4.4.4.4.4.4.4.4.4.4.4.4.2:2:2009年4.4.4.4.4.2.2.2.2.2.2.2.4.4.4.4.4.4.4.4.4.4.4.4.4.4.4.4.4.2:2.2.2.2:2009年3.3.4.4.4.4.4.4.4.4.4.4.4.4.4.4.4.4.4.4.4.4.4.4.4.4.4.4.4.4.4.4.4.4.4.4.4.4.4.2.4.4.4.4.4.4.4.4.4.4.4.4.4.4.4.4（9445-1:2009）ASEN ISO 14284（ISO 14284:1996 AS）EN ISO 148-1（ISO 148-1:2016）以及购买本文件时可用的所有现行修订本。

BS EN 10028-1:2017 specifies general technical delivery conditions for flat products for the construction of pressure equipment.The general technical delivery conditions in EN 10021 also apply.NOTE Once this European Standard is published in the EU Official Journal (OJEU) under Directive 2014/68/EU, presumption of conformity to the Essential Safety Requirements (ESRs) of Directive 2014/68/EU is limited to technical data of materials in this European Standard (Part 1 and the other relevant part of the series) and does not presume adequacy of the material to a specific item of equipment. Consequently, the assessment of the technical data stated in this material standard against the design requirements of this specific item of equipment to verify that the ESRs of Directive 2014/68/EU are satisfied, needs to be done.Cross References:EN 10021:2006ISO 6892-2:2011 Ed 1EN 10163-2:2004EN ISO 2566-1 (ISO 2566-1:1984 Adopted)ISO 9445-1:2009 Ed 1EN ISO 9444-2 (ISO 9444-2:2009) ASEN 10079:2007EN 10028-5:2017EN ISO 6892-2 (ISO 6892-2:2011) ASEN 10168:2004CEN/TR 10261:2013ISO 3651-2:1998EN ISO 9445-2 (ISO 9445-2:2009) ASEN 10160:1999ISO 2566-2:1984EN ISO 2566-2:1999ISO 14284:1996 (R06)ISO 148-1:2016NF EN ISO 3651-2:1998 (F)EN 10029:2010EN 10051:2010ISO 9444-1:2009 Ed 1EN 10028-2:2017BS EN 764-5:2014ISO 9445-2:2009 Ed 1EN 10164:2004EN 10028-7:2016EN 10028-3:2017ISO 18286:2008EN 10307:2001EN ISO 18286 (ISO 18286:2008) ASISO 2566-1:1984 (R10)EN 10088-1:2014EN ISO 6892-1 (ISO 6892-1:2016)EN 10048:1996ISO 9444-2:2009EN 10028-6:2017EN 10028-4:2017ISO 6892-1:2016EN ISO 377:2013EN 10020:1989EN ISO 9445-1 (ISO 9445-1:2009) ASEN ISO 14284 (ISO 14284:1996 AS)EN ISO 148-1 (ISO 148-1:2016) ASAll current amendments available at time of purchase are included with the purchase of this document.