ISO 3458:2015-塑料管道系统 - 配件和压力管之间的机械接头 - 内部压力下的泄漏测试方法-国家数字标准馆

现行 ISO 3458:2015

到馆阅读

收藏跟踪

购买正版

Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under internal pressure 塑料管道系统 - 配件和压力管之间的机械接头 - 内部压力下的泄漏测试方法

发布日期： 2015-03-26

ISO 3458:2015规定了检查机械配件和塑料压力管之间组装接头密封性的试验方法。无论用于连接塑料管的配件的设计和材料如何，本试验均适用。

ISO 3458:2015 specifies the method of test for checking the leak tightness of assembled joints between mechanical fittings and plastic pressure pipes. The test applies regardless of the design and material of the fitting used for jointing plastic pipe.

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 23.040.60管道部件和管道 - 法兰、管接头和连接件

关联关系

研制信息

归口单位： ISO/TC 138/SC 5

相似标准/计划/法规

BS EN ISO 3458-2015

Plastics piping systems. Mechanical joints between fittings and pressure pipes. Test method for leaktightness under internal pressure
塑料管道系统配件和压力管道之间的机械接头内压下密封性的试验方法

Plastic piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under negative pressure
塑料管道系统.配件和压力管道之间的机械接头.负压下密封性的试验方法

플라스틱 배관 시스템 — 압력관과 이음관의 기계적 연결부 — 내압하에서 수밀성 시험
塑料管道系统配件和压力管道之间的机械接头内压密封性试验方法

BS EN ISO 3501-2022

Plastics piping systems. Mechanical joints between fittings and pressure pipes. Test method for resistance to pull-out under constant longitudinal force
塑料管道系统配件和压力管道之间的机械接头恒定纵向力下抗拔出的试验方法

플라스틱 배관 시스템 — 압력관과 이음관의 기계적 연결부 — 축 방향 정하중 하의 뽑힘 저항 시험방법
塑料管道系统 - 配件和压力管道之间的机械接头 - 恒定纵向力下的抗拉力试验方法

Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for resistance to pull-out under constant longitudinal force
塑料管道系统.配件和压力管道之间的机械接头.恒定纵向力下抗拔出的试验方法

Plastics piping systems — Mechanical joints between fittings and pressure pipes — Test method for leaktightness under internal pressure of assemblies subjected to bending
塑料管道系统 - 配件和压力管之间的机械接头 - 受弯曲组件的内部压力下的密封性的测试方法

플라스틱 배관 시스템 — 압력관 및 이음관의 기계적 연결부 — 축 방향 정하중 하의 뽑힘 저항 시험방법
塑料管道系统配件和压力管道之间的机械接头恒定纵向力下抗拔性的试验方法

GOST R ISO 3501-2020

Трубопроводы из пластмасс. Механические соединения между фитингами и напорными трубами. Метод определения стойкости к выдергиванию под действием постоянного осевого усилия
塑料管道系统配件和压力管道之间的机械接头恒定纵向力下抗拔力的试验方法

BS EN ISO 16486-3-2020

Plastics piping systems for the supply of gaseous fuels. Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing-Fittings
气体燃料供应用塑料管道系统带熔焊和机械连接的未增塑聚酰胺（PA-U）管道系统

UNE-EN 713-1994

PLASTICS PIPING SYSTEMS. MECHANICAL JOINTS BETWEEN FITTINGS AND POLYOLEFIN PRESSURE PIPES. TEST METHOD FOR LEAKTIGHTNESS UNDER INTERNAL PRESSURE OF ASSEMBLIES SUBJECTED TO BENDING.
塑料管道系统配件和聚烯烃压力管之间的机械接头弯曲组件在内部压力下密封性的试验方法

GOST R ISO 3503-2020

Трубопроводы из пластмасс. Механические соединения между фитингами и напорными трубами. Метод испытания узлов соединений на герметичность под внутренним давлением при изгибе
塑料管道系统配件和压力管道之间的机械接头弯曲组件内部压力下密封性的试验方法

BS EN ISO 16486-5-2021

Plastics piping systems for the supply of gaseous fuels. Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing-Fitness for purpose of the system
气体燃料供应用塑料管道系统带熔焊和机械连接的未增塑聚酰胺（PA-U）管道系统

ISO 16486-3-2020

Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 3: Fittings
用于供应气体燃料的塑料管道系统 - 具有熔接和机械接合的未增塑聚酰胺（Pa-U）管道系统 - 第3部分:配件

GOST R ISO 3458-2020

Трубопроводы из пластмасс. Механические соединения между фитингами и напорными трубами. Метод испытания на герметичность под внутренним давлением
塑料管道系统配件和压力管道之间的机械接头内压密封性试验方法

ISO 16486-5-2021

Plastics piping systems for the supply of gaseous fuels — Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 5: Fitness for purpose of the system
供应气体燃料的塑料管道系统 - 熔合连接和机械连接的未增塑聚酰胺（PA-U）管道系统 - 第5部分:系统的适用性

DIN EN ISO 16486-3

Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 3: Fittings (ISO 16486-3:2020)
气体燃料供应用塑料管道系统带熔接和机械连接的未增塑聚酰胺（PA-U）管道系统第3部分:配件

DIN EN ISO 16486-5

Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 5: Fitness for purpose of the system (ISO 16486-5:2021)
气体燃料供应用塑料管道系统.带熔合连接和机械连接的未增塑聚酰胺（PA-U）管道系统.第5部分:系统适用性（ISO 16486-5-2021）；德文版EN ISO 16486-5:2021

BS 11/30242080 DC

BS ISO 16486-5. Plastics piping systems for the supply of gaseous fuels. Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing. Part 5. Fitness for purpose of the system
BS ISO 16486-5 气体燃料供应用塑料管道系统带熔焊和机械连接的未增塑聚酰胺（PA-U）管道系统第五部分系统适用性

DIN EN ISO 3458

Plastic piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure (ISO 3458:2015); German and English version EN ISO 3458:2015
塑料管道系统.配件和压力管道之间的机械接头.内部压力下的密封性试验方法（ISO 3458-2015）；德语和英语版本EN ISO 3458:2015

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统