首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ASTM D3543-24
到馆提醒
收藏跟踪
购买正版
Standard Test Method for Metal Glide Adhesion 金属滑动附着力的标准试验方法
发布日期: 2024-11-01
1.1 本试验方法 2 涵盖了确定地板表面金属滑动粘附造成的损坏的实验室程序。 1.2 以SI单位表示的值应被视为标准。 1.3 本标准并不旨在解决与其使用相关的所有安全性问题(如果有)。本标准的使用者有责任在使用前建立适当的安全、健康和环境实践并确定法规限制的适用性。 具体注意事项见 8.2 . 1.4 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。======意义和用途====== 3.1 本试验方法用于测定瓷砖中增塑剂对地板抛光剂本身的影响。如果地板抛光剂被瓷砖中的增塑剂软化,它将成为粘合剂并粘附到在标准温度下在标准重量下放置在抛光剂上的金属滑道上。通过对抛光剂下面的瓷砖的损坏来评估对抛光剂的不同程度的攻击。
1.1 This test method 2 covers a laboratory procedure for determining damage resulting from metal glide adhesion on floor surfaces. 1.2 The values stated in SI units are to be regarded as the standard. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. Specific precautions are given in 8.2 . 1.4 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee. ====== Significance And Use ====== 3.1 This test method is used to determine the effect of plasticizers in tile on the floor polish itself. If the floor polish is softened by the plasticizers in the tile, it will become an adhesive and adhere to the metal glide that is placed on the polish under standard weights at standard temperatures. Various degrees of attack on the polish are evaluated by the damage to the tile underneath the polish.
分类信息
关联关系
研制信息
归口单位: D21.04
相似标准/计划/法规
现行
ASTM D1062-08(2023)
Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
金属对金属粘合的劈裂强度的标准试验方法
2023-05-01
现行
ASTM F607-03(2019)
Standard Test Method for Adhesion of Gasket Materials to Metal Surfaces
垫圈材料与金属表面粘合的标准试验方法
2019-05-01
现行
KS D 0254(2017 Confirm)
도금의 밀착성 시험 방법
附着性试验金属镀覆方法
2001-12-28
现行
KS D 0254(2022 Confirm)
도금의 밀착성 시험 방법
金属涂层附着力试验方法
2001-12-28
现行
JIS H 8504-1999
Methods of adhesion test for metallic coatings
金属涂层附着力试验方法
1999-01-01
现行
GB/T 7749-1987
胶粘剂劈裂强度试验方法 (金属对金属)
Test method of cleavage strength of adhesive (metal to metal)
1987-05-25
现行
ASTM D2293-96(2024)
Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)
用压缩载荷测定胶粘剂剪切蠕变性能的标准试验方法(金属对金属)
2024-09-01
现行
ASTM D2294-96(2024)
Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
用拉伸载荷测定胶粘剂剪切蠕变性能的标准试验方法(金属对金属)
2024-09-01
现行
ASTM D3166-99(2020)
Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
通过拉伸载荷剪切胶粘剂疲劳性能的标准试验方法(金属/金属)
2020-01-01
现行
ASTM D1780-05(2020)
Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives
金属对金属粘合剂蠕变试验的标准实施规程
2020-12-15
现行
ASTM B905-00(2021)
Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test
用机械胶带试验评定金属和无机涂层附着力的标准试验方法
2021-10-01
现行
BS 5350-G3-1987
Methods of test for adhesives-Determination of ability of anaerobic adhesives to set on metal surfaces
胶粘剂的试验方法
1987-02-27
现行
ASTM D3433-99(2020)
Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
粘结金属接头中胶粘剂断裂强度的标准试验方法
2020-01-01
现行
ASTM B571-23
Standard Practice for Qualitative Adhesion Testing of Metallic Coatings
金属涂层定性附着力试验的标准实施规程
2023-11-01
现行
GB/T 13353-1992
胶粘剂耐化学试剂性能的测定方法 金属与金属
Test method for resistance of adhesive bonds to chemical reagents--Metal to metal
1992-01-14
现行
ASTM D2295-96(2024)
Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
高温下通过拉伸载荷测定粘合剂剪切强度性能的标准试验方法(金属对金属)
2024-09-01
现行
ASTM A1122/A1122M-22
Standard Test Method for Bend Testing of Metallic-Coated Steel Sheet to Evaluate Coating Adhesion
评估涂层附着力的金属涂层钢板弯曲试验的标准试验方法
2022-06-01
现行
GB/T 7750-1987
胶粘剂拉伸剪切蠕变性能试验方法 (金属对金属)
Test method of creep properties of adhesive in shear by tension loading (metal to metal)
1987-05-25
现行
BS EN 2243-2-2005
Aerospace series. Non-metallic materials. Structural adhesives. Test method-Peel metal-metal
航空航天系列 非金属材料 结构粘合剂 测试方法 剥金属
2005-12-07
现行
ASTM D3808-01(2021)
Standard Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion
通过斑点粘附定性测定粘合剂对基材的粘合性的标准测试方法
2021-04-01