제품의 형상 명세(GPS) — 열 영향으로 인한 길이 측정의 측정 불확도에 대한 계통적 오차 및 기여도
几何产品规格（gps） - 由于热影响而测量长度测量的不确定性的系统误差和贡献

2014-12-29

Geometrical product specifications (GPS) — Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences
几何产品规范（GPS）——热影响下长度测量的系统误差及其对测量不确定度的影响

2003-04-03

Geometrical product specifications (GPS) - Standard reference temperature for geometrical product specification and verification - Systematic errors and contributions to measurement uncertainty of length measurement due to thermal influences (ISO/TR 16015:2003)
几何产品规范（GPS）.几何产品规范和验证的标准参考温度.热影响引起的长度测量的系统误差和对测量不确定度的影响（ISO/TR 16015-2003）

2004-02-01

产品几何技术规范（GPS） 几何精度的检测与验证 第4部分：尺寸和几何误差评定、最小区域的判别模式
Geometrical product specifications (GPS)—Geometrical precision verification—Part 4：Evaluation of dimension and geometrical error，discriminant pattern of minimum zone

2021-10-11

Geometrical product specifications (GPS) - Micrometers - Part 1: Micrometers for external measurements; maximum permissible errors
产品几何技术规范（GPS）.千分尺.第1部分:外部测量用千分尺；最大允许误差

2017-02-01

Geometrical product specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM)-Estimation of errors in computing Gaussian associated features
几何产品规范（GPS） 坐标测量机（CMM）的验收和再鉴定试验

2008-07-31

제품의 형상 명세(GPS) — 좌표 측정기(CMM)의 인수 시험과 재검증 시험 — 제6부: 가우스 관련 형체 산출에 따른 오차의 평가
几何产品规格（GPS） - 坐标测量机（CMM）的验收和再验证测试 - 第6部分:计算高斯相关特征中的误差估计

2019-12-31

Geometrical Product Specifications (GPS) — Acceptance and reverification tests for coordinate measuring machines (CMM) — Part 6: Estimation of errors in computing Gaussian associated features
几何产品规范（GPS）——坐标测量机（CMM）的验收和再鉴定试验第6部分:计算高斯相关特征的误差估计

2001-12-20

Geometrical Product Specifications (GPS) -- Acceptance and reverification tests for coordinate measuring machines (CMM) -- Part 6: Estimation of errors in computing Gaussian associated features
产品几何量技术规范（GPS）坐标测量机（CMM）的验收和再验证试验第6部分:计算高斯相关特征的误差估计

2004-01-01

产品几何技术规范（GPS） 坐标测量机的验收检测和复检检测 第6部分:计算高斯拟合要素的误差的评定
Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features

2006-07-19

Geometrical Product Specifications (GPS). Acceptance and reverification tests for coordinate measuring machines (CMM). Part 6: Estimation of errors in computing Gaussian associated features. (ISO 10360-6:2001)
几何产品规范（GPS） 坐标测量机（CMM）的验收和再鉴定试验 第6部分:计算高斯相关特征的误差估计 （ISO 10360-6-2001）

2002-11-20

Geometrical Product Specifications (GPS) - Acceptance and reverification tests for coordinate measuring machines (CMM) - Part 6: Estimation of errors in computing Gaussian associated features (ISO 10360-6:2001+Cor. 1:2007)
产品几何量技术规范（GPS）.坐标测量机（CMM）的验收和再认证试验.第6部分:计算高斯相关特征的误差估计（ISO 10360-6-2001+Cor.1-2007）；德文版EN ISO 10360-6:2001+AC:2007

2009-01-01