Stainless steels for general purposes-Corrosion-resistant flat products
通用不锈钢

2014-11-30

Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
不锈钢.第2部分:一般用途耐腐蚀钢薄板/板材和带材的交货技术条件；德文版EN 10088-2:2014

2014-12-01

Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
不锈钢.第2部分:一般用途耐腐蚀钢薄板/板材和带材的交货技术条件

2008-02-20

Stainless steels-Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
不锈钢

2014-10-31

Stainless steels for general purposes — Part 2: Corrosion-resistant semi-finished products, bars, rods and sections
不锈钢用于一般用途 - 第2部分:耐腐蚀半成品 棒 棒和部分

2014-05-20

Stainless steels for general purposes-Corrosion-resistant semi-finished products, bars, rods and sections
一般用途的不锈钢 耐腐蚀半成品、棒材、棒材和型材

2014-05-31

Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
不锈钢.第4部分:建筑用耐腐蚀钢薄板/板材和带材的交货技术条件

2010-06-23

Механические свойства крепежных изделий из коррозионно-стойкой нержавеющей стали. Часть 1. Болты, винты и шпильки
耐腐蚀不锈钢紧固件的机械性能 螺栓 螺钉和螺栓

2014-10-20

Mechanical properties of corrosion-resistant stainless steel fasteners -- Part 1: Bolts, screws and studs
耐腐蚀不锈钢紧固件机械性能第1部分:螺栓、螺钉和螺柱

2013-01-01

Fasteners — Mechanical properties of corrosion-resistant stainless steel fasteners — Part 6: General rules for the selection of stainless steels and nickel alloys for fasteners
紧固件.耐腐蚀不锈钢紧固件的机械性能.第6部分:紧固件用不锈钢和镍合金选择的一般规则

2020-04-14

Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
不锈钢.第3部分:一般用途耐腐蚀钢的半成品、棒材、棒材、线材、型材和光亮制品的交货技术条件

2008-02-20

Stainless steels-Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
不锈钢

2014-10-31

Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
不锈钢.第5部分:建筑用耐腐蚀钢棒材、棒材、线材、型材和光亮制品的交货技术条件；德文版EN 10088-5:2009

2009-07-01

EN 10088-4. Stainless steels. Part 4. Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
EN 10088-4 不锈钢 第四部分 建筑用耐腐蚀钢板和钢带的交货技术条件

2005-12-21

Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
不锈钢.第5部分:建筑用耐腐蚀钢棒材、棒材、线材、型材和光亮制品的交货技术条件

2010-06-23

Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009)
耐腐蚀不锈钢紧固件的机械性能.第1部分:螺栓 螺钉和螺柱（ISO 3506-1-2009）

2010-10-20

스테인리스강의 입계 부식 저항성 측정 — 제1부: 오스테나이트계 및 페라이트 + 오스테나이트(2상 혼합)계 스테인리스강 — 질산 용액 무게감량 부식 시험(휴이시험)
不锈钢耐晶间腐蚀的测定 - 第1部分:奥氏体和铁素体 - 奥氏体（双相）不锈钢 - 通过测量质量损失测量硝酸介质中的腐蚀试验（Huey试验）

2019-10-31

Determination of resistance to intergranular corrosion of stainless steels — Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels — Corrosion test in nitric acid medium by measurement of loss in mass (Huey test)
不锈钢抗晶间腐蚀性的测定Spart 1:奥氏体和铁素体奥氏体（双相）不锈钢——通过质量损失测量在硝酸介质中进行腐蚀试验（休伊试验）

1998-05-13

Determination of resistance to intergranular corrosion of stainless steels - Part 1: Austenitic and ferritic-austenitic (duplex) stainless steels - Corrosion test in nitric acid medium by measurement of loss in mass (Huey test) (ISO 3651-1:1998)
不锈钢耐晶间腐蚀性的测定第1部分:奥氏体和铁素体奥氏体（双相）不锈钢通过质量损失测量在硝酸介质中的腐蚀试验（休伊试验）（ISO 3651-1-1998）；德文版EN ISO 3651-1:1998

1998-08-01

Draft Document - Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes; German and English version prEN 10088-2:2021
文件草案-不锈钢-第2部分:通用耐腐蚀钢薄板/板材和带材的交货技术条件；德语和英语版本prEN 10088-2:2021

2022-01-01