1.1 本安全规范涵盖了消费者蹦床围栏的组件、组装、使用、标签和性能要求（见安全规范 F381 ). 1.2 本规范适用于作为蹦床附件出售或与蹦床包装在一起的蹦床围栏( 1. )床的最小尺寸为3300英寸。 2. （2.1米 2. ), ( 2. )最小高度为20英寸（510毫米）( 3. )用于连续垂直跳跃活动，以及( 4. )供消费者使用。 1.3 本规范包括以下章节和选定小节: 第节 范围 1. 参考文件 2. 术语 3. 组件 4. 一般要求 5. 性能要求 6. 性能测试 6. 信息包 7. 产品标记 8. 包装和包装标记 9 1.4 本规范并不旨在解决与蹦床或蹦床围栏或两者相关的所有危险。 标准的存在本身并不一定能防止伤害。与其他体育活动一样，蹦床的使用也有受伤的风险，特别是如果设备使用不当。同样，仅使用蹦床围栏不一定能防止所有伤害。 1.5 以英寸-磅单位表示的值应被视为标准值。括号中给出的值是对国际单位制的数学转换，仅供参考，不被视为标准值。 1.6 以下预防性警告仅适用于本规范的测试方法部分。 本标准并不旨在解决与其使用相关的所有安全问题（如果有的话）。本标准的使用者有责任在使用前建立适当的安全、健康和环境实践，并确定监管限制的适用性。 1.7 本国际标准是根据世界贸易组织技术性贸易壁垒委员会发布的《关于制定国际标准、指南和建议的原则的决定》中确立的国际公认的标准化原则制定的。

1.1 This safety specification covers the components, assembly, use, labeling, and performance requirements of consumer trampoline enclosures (see Safety Specification F381 ). 1.2 This specification is applicable to trampoline enclosures to be sold as an accessory to or packaged with trampolines of ( 1 ) a minimum bed size of 3300 in. 2 (2.1 m 2 ), ( 2 ) a minimum height of 20 in. (510 mm), ( 3 ) intended for the purpose of continuous, vertical jumping activities, and ( 4 ) intended for consumer use. 1.3 This specification includes the following sections and selected subsections: Section Scope 1 Referenced Documents 2 Terminology 3 Components 4 General Requirements 5 Performance Requirements 6 Performance Tests 6 Information Packet 7 Product Marking 8 Packaging and Package Marking 9 1.4 This specification does not purport to address all of the hazards that may be associated with trampolines or trampoline enclosures, or both. The standard’s existence alone will not necessarily prevent injuries. Like other physical activities, trampoline use involves the risk of injury, particularly if the equipment is used improperly. Similarly, the use of a trampoline enclosure alone will not necessarily prevent all injuries. 1.5 The values stated in inch-pound units are to be regarded as standard. The values given in parentheses are mathematical conversions to SI units that are provided for information only and are not considered standard. 1.6 The following precautionary caveat pertains only to the test methods portion of this specification. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety, health, and environmental practices and determine the applicability of regulatory limitations prior to use. 1.7 This international standard was developed in accordance with internationally recognized principles on standardization established in the Decision on Principles for the Development of International Standards, Guides and Recommendations issued by the World Trade Organization Technical Barriers to Trade (TBT) Committee.