请注意:此版本的所有临时修订版将在您购买时提供。船舶上安装灯具的补充要求SUL 1598本要求是对灯具标准UL 1598中其他适用要求的补充。本补充文件中的条款参考 斜体是指UL 1598《灯具标准》中的条款。这些要求适用于根据美国海岸警卫队电气规范，使用接地系统安装在海上船舶上的灯具 工程法规46 CFR第110-113部分第J分章，以及国家电气规范ANSI/NFPA 70和推荐的 船上电气装置的实施规程，IEEE 45。这些要求不适用于在危险场所使用的船用照明灯具，如国家电气规范ANSI/NFPA 70《紧急情况》中所定义 照明船用灯具，或仅由电池、变压器、转换器或类似电源供电的低压船用灯具（低于50伏）。包含新特性、特性、组件、材料或系统的产品，或与本标准要求涵盖的特性、特性、组件、材料或系统不同的产品 涉及火灾、触电或人身伤害的风险，应使用适当的附加组件和最终产品要求进行评估，以保持 本标准意图最初预期的安全水平。其特征、特性、组件、材料或系统与 本标准的具体要求或规定不符合本标准。要求的修订应按照以下要求提出和采用: 制定、修订和实施本标准所采用的方法。

Please note: All interim revisions for this edition available at time of your purchase will be included.Supplemental Requirements for Luminaires for Installation on Marine VesselsUL 1598AThese requirements are supplementary to other applicable requirements in the Standard for Luminaires, UL 1598. Clause references in this supplement that are in italics are references to clauses in the Standard for Luminaires, UL 1598.These requirements apply to luminaires for installation on marine vessels utilizing grounded systems in accordance with the United States Coast Guard Electrical Engineering Regulations 46 CFR, Parts 110 - 113, Subchapter J and, insofar as it applies, the National Electrical Code, ANSI/NFPA 70, and the Recommended Practice for Electrical Installations on Shipboard, IEEE 45.These requirements do not apply to marine lighting luminaires for use in hazardous locations, as defined in the National Electrical Code, ANSI/NFPA 70, emergency lighting marine luminaires, or low voltage marine luminaires (less than 50 volts) supplied solely by a battery, transformer, converter, or similar power supply source.A product that contains features, characteristics, components, materials, or systems new or different from those covered by the requirements in this standard, and that involves a risk of fire or of electric shock or injury to persons shall be evaluated using appropriate additional component and end-product requirements to maintain the level of safety as originally anticipated by the intent of this standard. A product whose features, characteristics, components, materials, or systems conflict with specific requirements or provisions of this standard does not comply with this standard. Revision of requirements shall be proposed and adopted in conformance with the methods employed for development, revision, and implementation of this standard.