除ISO 16092-1外，本文件还规定了以下机械压力机和机械压力机生产系统的设计、制造和供应人员应采用的技术安全要求和措施: -第1组:带有部分回转离合器的压力机； -第2组:带伺服驱动系统的压力机（机械伺服压力机）。 注1:本文件中的要求基本适用于两组机械压力机。如果一项要求仅适用于一个组，则指定该组。 注2:其他类型的机动驱动系统提供与通常称为“伺服驱动”或“伺服电机”的功能类似的功能，因此，在本文件中使用的术语（例如，变频驱动系统）中，其用途被视为相同。 本文件涵盖的压力机的尺寸范围从由单个操作员生产小型工件的小型高速机器到由多个操作员生产大型复杂工件的大型相对低速机器。 本文件涉及与机械压力机和辅助设备（如移动模垫、工件弹出器、进给和传送系统）相关的所有重大危险，这些设备是机器的一部分，当它们按预期使用时，以及在制造商合理预见的误用条件下使用时（见第4条）。已考虑ISO 12100:2010，5.4中所述的机器寿命周期的所有阶段。 注2:所有重大危险是指本文件发布时已识别或与印刷机相关的危险。 除ISO 16092-1:2017未涵盖的机器外，本文件不涵盖以下机器: a） 通过使用液压或气动装置传递能量以施加压力机滑动运动； b） 具有两个或多个以彼此不同的角度取向移动的滑块； 注3:本文件适用于具有两个或多个以相同角度方向移动的滑块的压力机，例如具有内滑块和外滑块的压力机。 c） 通过使用一个或多个线性电机机构来传递能量以施加压力机滑动运动。

This document, in addition to ISO 16092-1, specifies technical safety requirements and measures to be adopted by persons undertaking the design, manufacture and supply of the following groups of mechanical presses and mechanical press production systems: — Group 1: Presses with a part revolution clutch(es); — Group 2: Presses with a servo drive system (Mechanical servo presses). NOTE 1 Requirements in this document are essentially applicable to both groups of the mechanical press. If a requirement applies to only one group, then the group is specified. NOTE 2 Other types of motorized drive systems provide similar functionalities to what is commonly called "servo drives" or "servo motors", and as such their use is considered the same within the terms used in this document (e.g. variable frequency drive systems). The presses covered by this document range in size from small high-speed machines with a single operator producing small workpieces to large relatively slow-speed machines with several operators and large complex workpieces. This document deals with all significant hazards relevant to mechanical presses and ancillary devices (e.g. moving die cushions, work-piece ejectors, feeding and transfer systems) which are integral to the machine, when they are used as intended and under the conditions of misuse which are reasonably foreseeable by the manufacturer (see Clause 4). All phases of the machine life cycle as described in ISO 12100:2010, 5.4 have been taken into consideration. NOTE 2 All significant hazards means those identified or associated with presses at the time of the publication of this document. In addition to machines not covered by ISO 16092-1:2017, this document does not cover machines which: a) transmit energy to impart press slide motion by using hydraulic or pneumatic means; b) have two or more slides moving in different angular orientations from each other; NOTE 3 This document applies to presses which have two or more slides moving in the same angular orientations, e.g. a press which has inner and outer slides. c) transmit energy to impart press slide motion by using a linear motor mechanism(s).