BS EN 16776:2016规定了基于 以卷、木板或瓷砖形式提供的具有热固性的聚氨酯。这 本规范不适用于由耐磨层和其他压实层构成的地板覆盖物 由组成、化学交联和/或设计不同的聚氨酯制成，可含有 装饰层、加固和其他背衬。本规范不适用于EN ISO 10582、EN ISO 24011、， EN 1817或EN 14565。为了鼓励消费者做出明智的选择，该标准包括一个分类系统 （参见EN ISO 10874）基于使用强度，这表明这些地板覆盖物应提供 满意的服务。它还规定了标记的要求。交叉引用:EN 424EN 425EN 1471EN ISO 105-B02ISO 105-B02EN ISO 291ISO 291EN ISO 10874ISO 10874EN ISO 23997ISO 23997EN ISO 23999EN ISO 24340ISO 24340EN ISO 24341ISO 24341EN ISO 24342EN ISO 24343-1ISO 24344ISO 24344EN ISO 24346ISO 11378- 1ISO 16581ASTM F1515EN 1081EN 1815EN 1817EN 12466EN 14565EN ISO 10582ISO 10582EN ISO 24011ISO 24011EN ISO 26987ISO 26987ISO 4918购买本文件时提供的所有当前修订版均包含在购买本文件中。

BS EN 16776:2016 specifies the characteristics of heterogeneous resilient floor coverings based on polyurethane with thermosetting properties supplied in either roll, planks or tile form. This specification does apply for floor covering consisting of a wear layer and other compact layers made from polyurethane which differ in composition, chemical crosslinking and/or design and can contain a decor layer, reinforcement and other backing.This specification does not apply for floor coverings that are specified in EN ISO 10582, EN ISO 24011, EN 1817 or EN 14565.To encourage the consumer to make an informed choice, the standard includes a classification system (see EN ISO 10874) based on intensity of use, which shows where these floor coverings should give satisfactory service. It also specifies requirements for marking.Cross References:EN 424EN 425EN 1471EN ISO 105-B02ISO 105-B02EN ISO 291ISO 291EN ISO 10874ISO 10874EN ISO 23997ISO 23997EN ISO 23999ISO 23999EN ISO 24340ISO 24340EN ISO 24341ISO 24341EN ISO 24342ISO 24342EN ISO 24343-1ISO 24343-1EN ISO 24344ISO 24344EN ISO 24346ISO 24346ISO 11378-1ISO 16581ASTM F1515EN 1081EN 1815EN 1817EN 12466EN 14565EN ISO 10582ISO 10582EN ISO 24011ISO 24011EN ISO 26987ISO 26987ISO 4918All current amendments available at time of purchase are included with the purchase of this document.