IEC 62005-9-1:20 15建立了一个通用可靠性鉴定计划，该计划适用于除连接器和连接器组件之外的所有无源光纤组件，该计划的通过表明了最低水平的可靠性保证，并允许该特定设备被称为符合该标准。本国际标准的目标如下: -规定无源光学元件通用可靠性鉴定标准(RQS)的要求； -就无源光学元件的生产和采购向供应商和最终用户提供指导，以满足和验证某些指定服务环境的可靠性鉴定标准； -给出可靠性鉴定压力测试和条件的最低清单； -为选择适当的测量和通过/失败标准制定指南；-提供相关参考资料； -并制定最低报告要求。本标准定义了一系列压力测试、其严重性、顺序、待测器械（DUT）数量、验收标准和报告要求。它还提供了选择适当测量和通过/失败标准的指南。 关键词:无源光学元件可靠性鉴定标准（RQS）

IEC 62005-9-1:2015 establishes a general reliability qualification program that applies to all passive fibre optic components except connectors and connector assemblies, the passing of which, suggests a minimum level of reliability assurance and allows that specific device to be called qualified to this standard. The objectives of this International Standard are as follows:
- to specify the requirements for a general reliability qualification standard (RQS) for passive optical components;
- to give direction to the supplier and to the end user on the production and purchase of passive optical components to meet and verify reliability qualification standards for certain specified service environments;
- to give the minimum list of reliability qualification stress tests and conditions;
- to establish guidance for the selection of appropriate measurements and pass/fail criteria;
- to give relevant references;
- and to establish the minimum reporting requirements. This standard defines a series of stress tests, their severity, sequences, quantities of devices under the test (DUT), acceptance criteria, and reporting requirements. It also gives guidelines to selecting appropriate measurements and pass/fail criteria. Keywords: reliability qualification standard (RQS) for passive optical components