本文件规定了可运输气缸组的设计、施工、测试和初始检查要求。 适用于装有压缩气体、液化气体及其混合物的气瓶的气瓶组。它也适用于乙炔的气瓶组。附件B中提供了溶剂中含有乙炔的乙炔气瓶束的附加要求。但是，本文件不包括溶剂乙炔气瓶束？免费乙炔瓶。 本文件规定了将单个气缸组装成一捆时适用的附加要求。 除非另有说明，否则一个气缸组内的单个气缸符合适用于单个气缸的标准。 本文件主要用于液化石油气（LPG）以外的工业气体，但也可用于液化石油气。交叉引用:ISO 10286:2015ISO 15615:2013ISO 10297ISO 14113ISO 13585ISO 16964ISO 11114-2EN 13134ISO 15607ISO 9606-1ISO 3807ISO 11114-1ISO 3059ISO 17638EN 1779ISO 7225ASTM E2261SME B31。3ASTM E709ISO 80000-4EN 1089-3ISO 10298ASTM E390ASTM E165ISO 13769ISO 32ISO 20475ASTM E1312ASTM E273ISO 23278EN 1593购买本文件时提供的所有现行修订版均包含在购买本文件中。

This document specifies the requirements for the design, construction, testing and initial inspection of a transportable cylinder bundle. It is applicable to cylinder bundles containing cylinders containing compressed gas, liquefied gas and mixtures thereof. It is also applicable to cylinder bundles for acetylene. Additional requirements for acetylene cylinder bundles containing acetylene in a solvent are provided in Annex B. This document does not, however, cover acetylene cylinder bundles with solvent?free acetylene cylinders. This document specifies the additional requirements that apply when individual cylinders are assembled into a bundle. Unless otherwise stated, individual cylinders within a cylinder bundle conform to applicable standards for single cylinders. This document is intended primarily for industrial gases other than liquefied petroleum gas (LPG), but it can also be used for LPG.Cross References:ISO 10286:2015ISO 15615:2013ISO 10297ISO 14113ISO 13585ISO 16964ISO 11114-2EN 13134ISO 15607ISO 9606-1ISO 3807ISO 11114-1ISO 3059ISO 17638EN 1779ISO 7225ASTM E2261ASME B31.3ASTM E709ISO 80000-4EN 1089-3ISO 10298ASTM E390ASTM E165ISO 13769ISO 32ISO 20475ASTM E1312ASTM E273ISO 23278EN 1593All current amendments available at time of purchase are included with the purchase of this document.