ISO 10893-10:2011规定了用于检测纵向和/或横向缺陷的无缝钢管和焊接钢管（埋弧焊（SAW）除外）的自动全周超声波剪切波（由传统或相控阵技术产生）测试要求。 在纵向缺陷测试的情况下，制造商可自行决定采用兰姆波测试。 对于无缝管，经买方和制造商同意，ISO 10893-10:2011的测试原则可用于检测具有其他方向的缺陷。 ISO 10893-10:2011适用于外径大于或等于10mm的管子的检验，通常为外径- 厚度比大于或等于5。 它也适用于圆形空心截面的测试。

ISO 10893-10:2011 specifies requirements for automated full peripheral ultrasonic shear wave (generated by conventional or phased array technique) testing of seamless and welded [except submerged arc-welded (SAW)] steel tubes, for the detection of longitudinal and/or transverse imperfections. In the case of testing on longitudinal imperfections, Lamb wave testing can be applied at the discretion of the manufacturer. For seamless tubes, by agreement between the purchaser and manufacturer, testing principles of ISO 10893-10:2011 can be applied to detect imperfections having other orientations. ISO 10893-10:2011 is applicable to the inspection of tubes with an outside diameter greater than or equal to 10 mm, normally with an outside diameter-to-thickness ratio greater than or equal to 5. It can also be applicable to the testing of circular hollow sections.