IEC 61010-1:20 10规定了以下类型的电气设备及其附件的一般安全要求，无论它们打算在哪里使用。 a)电气测试和测量设备 b)电气工业过程控制设备 c)电气实验室设备 这第三版取消并取代了2001年出版的第二版。它构成技术修订。这个版本包括第二版的以下重大变化，以及许多其他变化。 -该标准的范围已经扩大，包括所有可能使用这些产品的地点，因此这些产品的专业和非专业版本都在范围之内。 -测试和测量电路的要求（在各个子条款和整个条款16中）已被删除并包含在特定标准IEC 61010中-2-030. -绝缘要求（6.7）已完全改写。 -增加了防止机械危险的额外要求（第7条）。 -表面温度限制（条款10）已被修改以符合EN 563的限制。 -辐射要求（第12条）已被修改，并考虑到预期发射和非预期发射之间的区别。 -增加了合理可预见的误用和人体工程学方面的要求（第16条）。 -增加了一个新条款（第17条），以处理标准未涵盖的危害和环境，同时增加了一个新的信息性附件（附件J），涉及风险评估。 -一个新的资料性附件（附件E）涉及减少微环境污染程度的方法。-增加了用于防止污染的涂料的鉴定要求（附录H）。 -增加了一个新的资料性附件（附件I），进一步解释如何确定电源电路的工作电压。 它具有IEC指南104中规定的团体安全出版物的状态。 2011年5月的勘误表1、2013年2月的判读表1和2013年10月的勘误表2的内容已纳入本副本。

IEC 61010-1:2010 specifies general safety requirements for the following types of electrical equipment and their accessories, wherever they are intended to be used.
a) Electrical test and measurement equipment
b) Electrical industrial process-control equipment c) Electrical laboratory equipment
This third edition cancels and replaces the second edition published in 2001. It constitutes a technical revision. This edition includes the following significant changes from the second edition, as well as numerous other changes.
- The scope of the standard has been expanded to include all locations where these products may be used, so that both professional and non-professional versions of these products are within the scope.
- The requirements for testing and measuring circuits (in various subclauses and the entirety of Clause 16) have been removed and included in a particular standard IEC 61010-2-030.
- Insulation requirements (6.7) have been completely rewritten.
- Additional requirements for protection against mechanical HAZARDS (Clause 7) have been included.
- Surface temperature limits (Clause 10) have been modified to conform to the limits of EN 563.
- Radiation requirements (Clause 12) have been modified, and take into account a distinction between intended emission and unintended emission.
- Requirements for reasonably foreseeable misuse and ergonomic aspects have been added (Clause 16).
- A new clause (Clause 17) has been added to deal with HAZARDS and environments not covered by the standard, along with a new informative annex (Annex J) dealing with RISK assessment.
- A new informative annex (Annex E) addresses methods of reducing the POLLUTION DEGREE of a micro-environment.
- Requirements for the qualification of coatings for protection against POLLUTION have been added (Annex H).
- A new informative annex (Annex I) has been added to further explain how to determine the WORKING VOLTAGE of a MAINS CIRCUIT.
It has the status of a group safety publication, as specified in IEC Guide 104. The contents of the corrigendum 1 of May 2011, the interpretation sheet 1 of February 2013 and the corrigendum 2 of October 2013 have been included in this copy.