BS EN ISO 14120:2015规定了设计、施工和选择的一般要求 为保护人员免受机械危险而提供的防护装置。本国际标准指出了可能影响工程设计和施工的其他危险 警卫。本国际标准适用于安装后制造的机械防护装置 出版。如果使用固定式和移动式防护装置，则这些要求适用。这个国际标准 不包括联锁装置。ISO 14119涵盖了这些内容。本国际标准未规定与以下方面有关的特殊系统的要求: 机动性，如ROPS（翻滚保护结构）、FOPS（坠落物体保护结构）和 顶部（翻倒保护结构）或机械提升负载的能力。交叉引用:ISO 12100:2010ISO 13855ISO 13857ISO 14119ISO 14123-1ISO 14159IEC 60204-1:2005ISO 11200ISO 11428ISO 11429ISO 13854ISO 14118ISO 14159ISO 14738ISO 19353ISO 25980IEC/TR 61340-1EN 614-1EN 614-2EN 1005-3EN 1127-1EN 122542006/42/E购买本文件时可提供的所有现行修订版。

BS EN ISO 14120:2015 specifies general requirements for the design, construction, and selection of guards provided to protect persons from mechanical hazards.This International Standard indicates other hazards that can influence the design and construction of guards.This International Standard applies to guards for machinery which will be manufactured after it is published.The requirements are applicable if fixed and movable guards are used. This International Standard does not cover interlocking devices. These are covered in ISO 14119.This International Standard does not provide requirements for special systems relating specifically to mobility such as ROPS (rollover protective structures), FOPS (falling-object protective structures), and TOPS (tip over protective structures) or to the ability of machinery to lift loads.Cross References:ISO 12100:2010ISO 13855ISO 13857ISO 14119ISO 14123-1ISO 14159IEC 60204-1:2005ISO 11200ISO 11428ISO 11429ISO 13854ISO 14118ISO 14159ISO 14738ISO 19353ISO 25980IEC/TR 61340-1EN 614-1EN 614-2EN 1005-2EN 1005-3EN 1127-1EN 122542006/42/ECAll current amendments available at time of purchase are included with the purchase of this document.