首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 EN 868-4:2017
到馆阅读
收藏跟踪
购买正版
Packaging for terminally sterilized medical devices - Part 4: Paper bags - Requirements and test methods 用于终端灭菌医疗器械的包装 - 第4部分:纸袋 - 要求和测试方法
发布日期: 2017-02-08
实施日期: 2017-02-08
本欧洲标准草案为EN 868-3规定的纸张制造的纸袋提供了测试方法和价值,这些纸袋用作无菌屏障系统和/或旨在将终末消毒的医疗设备的无菌性保持在使用点的包装系统。 保护性包装的需要可由制造商和用户确定。 EN 868的这一部分仅介绍了EN 868本部分涵盖的产品特有的性能要求和测试方法,但不添加或修改EN ISO 11607-1中规定的一般要求。 因此,4.2至4.6中的特定要求可用于证明符合EN ISO 11607-1中的一个或多个但不是全部要求。 EN 868本部分规定的材料仅供一次性使用。 当在无菌屏障系统内使用额外的材料以便于组织,干燥或无菌呈现(例如内包装,容器过滤器指示器,包装清单,垫子,仪器组织器组,托盘衬垫或医疗装置周围的附加信封)时,那么其他要求,包括在验证活动期间确定这些材料的可接受性可能适用
This draft European Standard provides test methods and values for paper bags manufactured from paper specified in EN 868-3, used as sterile barrier systems and/or packaging systems that are intended to maintain sterility of terminally sterilized medical devices to the point of use. The need for a protective packaging may be determined by the manufacturer and the user. This part of EN 868 only introduces performance requirements and test methods that are specific to the products covered by this part of EN 868 but does not add or modify the general requirements specified in EN ISO 11607-1. As such, the particular requirements in 4.2 to 4.6 can be used to demonstrate compliance with one or more but not all of the requirements of EN ISO 11607-1. The materials specified in this part of EN 868 are intended for single use only. When additional materials are used inside the sterile barrier system in order to ease the organization, drying or aseptic presentation (e.g. inner wrap, container filter indicators, packing lists, mats, instrument organizer sets, tray liners or an additional envelope around the medical device) then other requirements, including the determination of the acceptability of these materials during validation activities, may apply.
分类信息
关联关系
研制信息
归口单位: CEN/TC 102-
相似标准/计划/法规
现行
EN 868-2-2017
Packaging for terminally sterilized medical devices - Part 2: Sterilization wrap - Requirements and test methods
用于终端灭菌医疗器械的包装 - 第2部分:灭菌包装 - 要求和测试方法
2017-02-08
现行
UNE-EN 868-4-2009
Packaging for terminally sterilized medical devices - Part 4: Paper bags - Requirements and test methods
最终灭菌医疗器械的包装第4部分:纸袋要求和试验方法
2009-12-02
现行
EN 868-6-2017
Packaging for terminally sterilized medical devices - Part 6: Paper for low temperature sterilization processes - Requirements and test methods
用于终端灭菌医疗器械的包装 - 第6部分:低温灭菌过程用纸 - 要求和测试方法
2017-02-08
现行
YY/T 0698.4-2009
最终灭菌医疗器械包装材料 第4部分:纸袋 要求和试验方法
Packaging materials for terminal sterilized medical devices—Part 4:Paper bags—Requirements and test methods
2009-06-16
现行
SN/T 3062.2-2011
进口医疗器械灭菌包装 第2部分:纸袋-要求和试验方法
Packaging materials for terminally sterilized medical devices for import-Part 2:Paper bags-Requirements and test methods
2011-09-09
现行
EN 868-7-2017
Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods
用于终端灭菌医疗器械的包装 - 第7部分:用于低温灭菌过程的粘合剂涂布纸 - 要求和测试方法
2017-02-08
现行
EN 868-9-2018
Packaging for terminally sterilized medical devices - Part 9: Uncoated nonwoven materials of polyolefines - Requirements and test methods
用于终端灭菌医疗器械的包装 - 第9部分:聚烯烃的无涂层非织造材料 - 要求和测试方法
2018-12-19
现行
UNE-EN 868-2-2009
Packaging for terminally sterilized medical devices - Part 2: Sterilization wrap - Requirements and test methods
最终灭菌医疗器械的包装第2部分:灭菌包装要求和试验方法
2009-12-02
现行
EN 868-10-2018
Packaging for terminally sterilized medical devices - Part 10: Adhesive coated nonwoven materials of polyolefines - Requirements and test methods
用于终端灭菌医疗器械的包装 - 第10部分:聚烯烃的粘合剂涂层非织造材料 - 要求和测试方法
2018-12-19
现行
UNE-EN 868-6-2009
Packaging for terminally sterilized medical devices - Part 6: Paper for low temperature sterilization processes - Requirements and test methods
最终灭菌医疗器械的包装第6部分:低温灭菌用纸要求和试验方法
2009-12-02
现行
KS P ISO 11607-1
최종 멸균 처리한 의료기기의 포장 — 제1부: 재료, 무균 장벽 시스템 및포장 시스템에 대한 요구사항
用于终端灭菌医疗器械的包装 - 第1部分:材料 无菌屏障系统和包装系统的要求
2018-11-05
现行
ISO 11607-1-2019
Packaging for terminally sterilized medical devices — Part 1: Requirements for materials, sterile barrier systems and packaging systems
用于终端灭菌医疗器械的包装 - 第1部分:材料 无菌屏障系统和包装系统的要求
2019-01-31
现行
EN ISO 11607-1-2020
Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems (ISO 11607-1:2019)
用于终端灭菌医疗器械的包装 - 第1部分:材料 无菌屏障系统和包装系统的要求
2020-01-15
现行
EN 868-3-2017
Packaging for terminally sterilized medical devices - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements and test methods
用于终端灭菌医疗器械的包装 - 第3部分:用于制造纸袋(EN 868-4中规定)和用于制造袋和卷轴(EN 868-5中规定的)的纸张) - 要求和试验方法
2017-02-08
现行
EN 868-8-2018
Packaging for terminally sterilized medical devices - Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods
用于终端灭菌医疗器械的包装 - 第8部分:符合EN 285标准的蒸汽灭菌器的可重复使用灭菌容器 - 要求和试验方法
2018-12-19
现行
EN 868-5-2018
Packaging for terminally sterilized medical devices - Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods
终端灭菌医疗器械的包装 - 第5部分:多孔材料和塑料薄膜结构的可密封袋和卷轴 - 要求和测试方法
2018-12-19
现行
YY/T 0698.6-2009
最终灭菌医疗器械包装材料 第6部分:用于低温灭菌过程或辐射灭菌的无菌屏障系统生产用纸要求和试验方法
Packaging materials for terminal sterilized medical devices—Part 6:Paper for manufacture of sterile barrier systems intended for sterilization by low temperature sterilization processes or irradiation—Requirements and test methods
2009-06-16
现行
UNE-EN 868-3-2009
Packaging for terminally sterilized medical devices - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements and test methods
最终灭菌医疗器械的包装.第3部分:纸袋(EN 868-4中规定)和袋子和卷轴(EN 868-5中规定)制造用纸.要求和试验方法
2009-12-02
现行
UNE-EN 868-7-2009
Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods
最终灭菌医疗器械的包装.第7部分:低温灭菌过程用胶粘剂涂布纸.要求和试验方法
2009-12-02
现行
UNE-EN 868-1-1997
PACKAGING MATERIALS AND SYSTEMS FOR MEDICAL DEVICES WHICH ARE TO BE STERILIZED. PART 1: GENERAL REQUIREMENTS AND TEST METHODS.
待灭菌医疗器械的包装材料和系统 第1部分:一般要求和试验方法
1997-11-28