本文件规定了允许安装I、II、III和VI类客梯的必要尺寸。 这些尺寸反映了设备的要求。 本文件适用于所有新电梯安装，不考虑驱动系统，包括安装在新建筑中的一个入口的轿厢。然而，对于侧面带有配重的布置，可以采用直通式入口配置。如果相关，本文件也适用于现有建筑中的安装。 本文件不适用于额定速度大于6.0 m/s的电梯。 注:用户有责任就此类安装咨询制造商。

This document specifies the necessary dimensions to permit the installation of passenger lifts of class I, II, III and VI. These dimensions reflect the requirements for the apparatus. This document is applicable to all new lift installations, irrespective of drive systems, including a car with one entrance, to be installed in a new building. However, for arrangements with counterweight at the side, a through-entrance configuration is possible. Where relevant, this document is also applicable to an installation in an existing building. This document is not applicable to lifts of rated speed greater than 6,0 m/s. NOTE It is the responsibility of the user to consult the manufacturer for such installations.