本文件规定了以下各项的安全要求和措施: -平面刨床，也称为接合器， -厚度刨床，也称刨床或单面刨床， -组合表面/厚度刨床 具有固定的刀块位置，在厚度刨削模式下具有集成进给，在刨削模式下具有或不具有可拆卸的动力进给装置，手动加载和/或卸载工件，并能够连续生产使用，以下也称为“机器”。 这些机器设计用于切割实木和具有与木材相似物理特性的材料。 当按照预期和制造商预见的条件操作、调整和维护机器时，其处理附录A中列出的与机器相关的所有重大危险、危险情况和事件；也考虑了合理可预见的滥用。运输、组装、拆卸、禁用和报废阶段也已考虑在内。 它也适用于表面刨床和配有可选榫眼装置的组合表面/厚度刨床，其危险已得到处理。 本文件不适用于: a） 具有多个刀盘的机器； b） 带有由单独电机驱动的榫眼装置的机器； c） 在厚度刨削模式下，切割块可调节切割深度设置的机器； d） 通过安装或拆卸零件/装置实现从刨削模式到厚度刨削模式或反之的机器； e） 表面刨削和厚度刨削可以同时在刀块的同一部分上进行的机器； f） 拟在潜在爆炸性环境中使用的机器； g） 在其作为国际标准出版之日之前制造的机器。

This document specifies the safety requirements and measures for — surface planing machines, also called jointers, — thickness planing machines, also called planers or single surface planers, — combined surface/thickness planing machines with fixed cutter block position, with an integrated feed in thickness planing mode, with or without demountable power feed device in planing mode, with manual loading and/or unloading of the workpiece and capable of continuous production use, hereinafter referred to also as “machines”. The machines are designed to cut solid wood and material with similar physical characteristics to wood. It deals with all significant hazards, hazardous situations and events as listed in Annex A relevant to the machines when operated, adjusted and maintained as intended and under the conditions foreseen by the manufacturer; reasonably foreseeable misuse has been considered too. Transport, assembly, dismantling, disabling and scrapping phases have also been taken into account. It is also applicable to surface planing machines and combined surface/thickness planing machines fitted with an optional mortising device, whose hazards have been dealt with. This document does not apply to: a) machines with more than one cutter block; b) machines with a mortising unit driven by a separate motor; c) machines where the cutter block is adjustable for depth of cut setting in thickness planing mode; d) machines where the conversion from planing to thickness planing mode or vice versa is achieved by mounting or demounting parts/units; e) machines where surface planing and thickness planing can be performed on the same section of the cutter block at the same time; f) machines intended for use in potentially explosive atmosphere; g) machines manufactured prior to the date of its publication as an international standard.