BS EN 1918-5:2016涵盖了设计、施工、测试、， 调试、运行、维护和废弃井口与天然气管网连接处之间的地下储气库（UGS）地面设施。它规定了安全和环境可接受的做法。对于地下储存所需的地下设施，EN 1918-1至EN 1918-4的相关部分适用。在这种情况下，“气体”是指任何碳氢化合物燃料: 在15°C的温度和0.1 MPa的压力下处于气态（包括天然气 天然气、压缩天然气（CNG）和液化石油气（LPG）。存储的产品也被命名为 液体）；满足特定质量要求，以保持地下仓库的完整性， 性能、环境兼容性，并满足合同要求。本欧洲标准规定了地下储气设施的通用基本原则。本欧洲标准的用户应注意，存在更详细的标准和/或实践规范。 附件A中列出了相关标准的非详尽清单。本欧洲标准旨在与这些国家标准和/或实践规范结合使用，并不取代它们。如果国家立法/法规中更严格的要求与本欧洲标准的要求发生冲突，则以国家立法/法规为准，如CEN/TR 13737（所有部分）所示。注CEN/TR 13737（所有零件）包含: 澄清一个国家适用的相关立法/法规；适当时，应满足更严格的国家要求；获取最新信息的国家联络点。本欧洲标准不适用于现有设施。交叉引用:EN 1918-1EN 1918-2EN 1918-3EN 1918-4购买本文件时可获得的所有现行修订均包含在购买本文件中。

BS EN 1918-5:2016 covers the functional recommendations for the design, construction, testing, commissioning, operation, maintenance and abandonment of the surface facilities for underground gas storage (UGS), between the wellhead and the connection to the gas grid.It specifies practices which are safe and environmentally acceptable.For necessary subsurface facilities for underground storage, the relevant part of EN 1918-1 to EN 1918-4 applies.In this context, "gas" is any hydrocarbon fuel:which is in a gaseous state at a temperature of 15 °C and under a pressure of 0,1 MPa (this includes natural gas, compressed natural gas (CNG) and liquefied petroleum gas (LPG). The stored product is also named fluid);which meets specific quality requirements in order to maintain underground storage integrity, performance, environmental compatibility and fulfils contractual requirements.This European Standard specifies common basic principles for underground gas storage facilities. Users of this European Standard should be aware that more detailed standards and/or codes of practice exist. A nonexhaustive list of relevant standards can be found in Annex A.This European Standard is intended to be applied in association with these national standards and/or codes of practice and does not replace them.In the event of conflicts in terms of more restrictive requirements in the national legislation/regulation with the requirements of this European Standard, the national legislation/regulation takes precedence as illustrated in CEN/TR 13737 (all parts).NOTE CEN/TR 13737 (all parts) contains:clarification of relevant legislation/regulations applicable in a country;if appropriate, more restrictive national requirements;national contact point for the latest information.This European Standard is not intended to be applied retrospectively to existing facilities.Cross References:EN 1918-1EN 1918-2EN 1918-3EN 1918-4All current amendments available at time of purchase are included with the purchase of this document.