AWS B2.1-4-220:1999(R2009)-铬钼钢（M-4/P-4 第1组或第2组） E8018-B2 1/8至1/2英寸的钨极气体保护焊（自耗镶块根部）厚度焊接状态 1/8至3/4英寸厚度焊后热处理条件 IN515和ER80S-B2 主要用于管道应用-国家数字标准馆

现行

AWS B2.1-5A-226-1999(R2009)

Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding (Consumable Insert Root) followed by Shielded Metal Arc Welding of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 through 1/2 in. Thick, As-Welded Condition; 1/8 through 1-1/2 in. Thick, PWHT Condition, IN521, ER90S-B3, and E9
1/8至1/2英寸铬钼钢（M-5A/P-5A）的气体保护钨极电弧焊（自耗镶块根部）和金属保护电弧焊的标准焊接工艺规范（SWPS）厚如焊接状态；1/8至1-1/2英寸厚度、焊后热处理条件、IN521、ER90S-B3和E9

1999-12-08

现行

AWS B2.1-5A-225-1999(R2009)

Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding (Consumable Insert Root) of Chromium-Molybdenum Steel (M-5A/P-5A), 1/8 through 1/2 in. Thick, As-Welded Condition; 1/8 through 3/4 in. Thick, PWHT Condition, IN521 and ER90S-B3, Primarily Pipe Applications
1/8至1/2英寸铬钼钢（M-5A/P-5A）的钨极气体保护焊（自耗镶块根部）标准焊接工艺规范（SWPS）厚如焊接状态；1/8至3/4英寸厚度焊后热处理条件 IN521和ER90S-B3 主要用于管道应用

1999-12-08

现行

AWS B2.1-8-216-2001(R2012)

Gas Tungsten Arc Welding With Consumable Insert Root Followed by Shieded Metal Arc Welding of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, IN3XX and ER3XX, As-Welded Condition, Primarily Pipe Applications
焊接状态下 1/8至1-1/2英寸厚、IN3XX和ER3XX的奥氏体不锈钢（M-8/P-8/S-8 第1组）的自耗镶块根部钨极气体保护焊然后进行屏蔽金属极电弧焊主要用于管道应用

2001-10-31

现行

AWS B2.1-8-215-2001(R2012)

Gas Tungsten Arc Welding With Consumable Insert Root of Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, IN3XX and ER3XX, As-Welded Condition, Primarily Pipe Applications
1/8至1-1/2英寸厚的奥氏体不锈钢（M-8/P-8/S-8 第1组）自耗镶块根部的钨极气体保护焊 IN3XX和ER3XX 焊接状态主要用于管道应用

2001-10-31

现行

AWS B2.1-8-321-2018

Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding with Consumable Insert Root of Austenitic Stainless Steel (S-8), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-3XX, in the As-Welded Condition, Primarily Pipe for Naval Applications
海军应用标准焊接工艺规范（SWPS-N）在焊接状态下采用1/8英寸[3 mm]至1-1/2英寸[38 mm]厚的MIL-3XX奥氏体不锈钢（S-8）自耗镶块根部进行钨极气体保护焊主要用于海军应用的管道

2018-08-03

现行

1A1W1S1 Archive Product 517

Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding with Consumable Insert Root of Austenitic Stainless Steel (S-8), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-3XX, in the As-Welded Condition, Primarily Pipe for Naval Applications
海军应用标准焊接工艺规范（SWPS-N）在焊接状态下采用1/8英寸[3 mm]至1-1/2英寸[38 mm]厚的MIL-3XX奥氏体不锈钢（S-8）自耗镶块根部进行钨极气体保护焊主要用于海军应用的管道

2018-08-03

现行

AWS B2.1-1-314-2018

Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding with Consumable Insert Root of Carbon Steel (S-1), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-MS-1 and MIL-70S-2, in the As-Welded or PWHT Condition, Primarily Pipe for Naval Applications
海军应用标准焊接工艺规范（SWPS-N）在焊态或焊后热处理条件下使用1/8英寸[3毫米]至1-1/2英寸[38毫米]厚的碳钢（S-1）自耗镶块根部进行钨极气体保护焊 MIL-MS-1和MIL-70S-2 主要用于海军应用的管道

2018-08-03

现行

AWS B2.1-1-315-2018

Standard Welding Procedure Specification for Naval Applications (SWPS-N) for Gas Tungsten Arc Welding with Consumable Insert Root of Carbon Steel (S-1), 1/8 inch [3 mm] through 1-1/2 inch [38 mm] Thick, MIL-MS-1 and MIL-70S-2, in the As-Welded or PWHT Condition, Primarily Pipe for Naval Applications
海军应用标准焊接工艺规范（SWPS-N）在焊态或焊后热处理条件下使用1/8英寸[3毫米]至1-1/2英寸[38毫米]厚的碳钢（S-1）自耗镶块根部进行钨极气体保护焊 MIL-MS-1和MIL-70S-2 主要用于海军应用的管道

2018-08-03

现行

AWS B2.1-1/8-231-2002

Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding with Consumable Insert Root followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Groups 1 or 2) to Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, IN309, ER309 and E309-15
《1/8至1-1/2英寸厚、IN309、ER309和E309-15奥氏体不锈钢（M-8/P-8/S-8 第1组或第2组）与碳钢（M-1/P-1/S-1 第1或第2组）的气体保护钨极电弧焊及自耗镶块根部的标准焊接工艺规范》（SWPS）

现行

1A1W1S1 Archive Product 410

Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding with Consumable Insert Root followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Groups 1 or 2) to Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/8 through 1-1/2 inch Thick, IN309, ER309 and E309-15
《1/8至1-1/2英寸厚、IN309、ER309和E309-15奥氏体不锈钢（M-8/P-8/S-8 第1组或第2组）与碳钢（M-1/P-1/S-1 第1或第2组）的气体保护钨极电弧焊及自耗镶块根部的标准焊接工艺规范》（SWPS）

现行

AWS B2.1-1-211-2001(R2012)

Standard WPS for Gas Tungsten Arc Welding with Consumable Inserts Followed by Shielded Metal Arc Welding of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1 1/2" Thick, INMs-1, ER70S-2, and E7018, As-Welded or PWHT Condition, Primarily Pipe App.
1/8至1/2“厚、INMs-1、ER70S-2和E7018的碳钢（M-1/P-1/S-1 第1组或第2组）在焊态或焊后热处理状态下用自耗嵌件进行钨极气体保护焊的标准WPS 主要用于管道应用

2001-10-31

现行

AWS B2.1-1/8-230-2002-AMD1(R2013)

Standard Welding Procedure Specification (SWPS) for Gas Tungsten Arc Welding with Consumable Insert Root of Carbon Steel (M-1/P-1/S-1, Groups 1 or 2) to Austenitic Stainless Steel (M-8/P-8/S-8, Group 1), 1/16 through 1-1/2 inch Thick, IN309 and ER309(L), As-Welded Condition, Primarily Pipe Applicati
用碳钢（M-1/P-1/S-1 第1或2组）自耗镶块根部与奥氏体不锈钢（M-8/P-8/S-8 第1组）进行钨极气体保护焊的标准焊接工艺规范（SWPS） 1/16至1-1/2英寸厚 IN309和ER309（L）焊态主要用于管道应用

现行

AWS B2.1-1-210-2001(R2012)

Standard WPS for Gas Tungsten Arc Welding with Consumable Inserts of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1 1/2" Thick, INMs-1 and ER70S-2, As-Welded or PWHT Condition, Primarily Pipe Applications
1/8至1/2“厚、INMs-1和ER70S-2的碳钢（M-1/P-1/S-1 第1组或第2组）自耗插入件的气体保护钨极电弧焊标准焊接工艺规程焊态或焊后热处理条件下主要用于管道应用

2012-03-29

现行

1A1W1S1 Archive Product 373

Standard WPS for Gas Tungsten Arc Welding with Consumable Inserts of Carbon Steel (M-1/P-1/S-1, Group 1 or 2), 1/8 through 1 1/2" Thick, INMs-1 and ER70S-2, As-Welded or PWHT Condition, Primarily Pipe Applications
1/8至1/2“厚、INMs-1和ER70S-2的碳钢（M-1/P-1/S-1 第1组或第2组）自耗插入件的气体保护钨极电弧焊标准焊接工艺规程焊态或焊后热处理条件下主要用于管道应用

2012-03-29