1.1本规范涵盖钉子、钉子、订书钉和其他从动紧固件，如表1中列出的紧固件延展性信息和尺寸信息。 注:紧固件延性信息见表2，尺寸信息见表3-63。 1.2本规范中所述的紧固件由手动工具、电动工具或机械装置以单次或多次撞击方式驱动，并可定位为手动、工具或机器撞击。 1.3以英寸-磅为单位的数值应视为标准值。 1.4 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。

1.1 This specification covers nails, spikes, staples, and other driven fasteners, as listed in Fastener ductility information is presented in and dimensional information in Table 1. Note—Fastener ductility information is presented in Table 2 and dimensional information in Tables 3-63. 1.2 Fasteners described in this specification are driven by hand tool, power tool, or mechanical device in single or multiple strikes and may be positioned for striking by hand, tool, or machine. 1.3 The values stated in inch-pound units are to be regarded as the standard. 1.4 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.