新的！IEC 60335-2-102:2017作为IEC 60335-2-102:2017 RLV提供，其中包含国际标准及其红线版本，显示了与上一版本相比技术内容的所有变化。IEC 60335-2-102:2017涉及家用和类似用途的带有电气连接的燃气、石油和固体燃料燃烧器具的安全，其额定电压对于单相器具不超过250 V，对于其他器具不超过480 V。本标准涵盖了这些电器的电气安全和其他一些安全方面。当设备也符合燃料燃烧设备的相关标准时，所有安全方面都包括在内。如果电器包含电加热源，当电器还符合？IEC 60335的相关第2部分。本标准范围内的器具示例有 -中央供暖锅炉； -商业餐饮设备； -炊具； -洗衣和清洁用具； -房间加热器； -暖风加热器； -热水器。 不用于正常家庭使用但可能对公众造成危险的电器，如用于商店、轻工业和农场的非专业人员使用的电器，属于本标准的范围。本标准涉及所有人都会遇到的器具带来的合理可预见的危害。但是，一般来说，它没有考虑到？ -以下人士（包括儿童） ？身体、感官或精神能力；或 ？缺乏经验和知识 防止他们在没有监督或指导的情况下安全使用设备；-儿童在玩电器。 提请注意以下事实: -对于拟用于车辆或船舶或飞机上的器具，可能需要附加要求； 本标准不适用于 -专供工业用途的器具； -拟在有特殊条件的地方使用的器具，例如存在腐蚀性或爆炸性环境（灰尘、蒸汽或气体）。第二版取消并取代了2004年出版的第一版，包括其修正案1（2008年）和修正案2（2012年）。这个版本构成了一个技术修订版。与上一版相比，该版本包括以下重大技术变化:对具有可放置杯子的平坦表面的器具引入了溢出测试(15。101);术语和定义被重新编号，一些注释被转换为规范性文本或被删除（19.11.2，22.103）。本出版物是根据ISO/IEC指令第2部分起草的。本第2-102部分应与最新版本的IEC 60335-1及其修正案一起使用。它是在IEC 60335-1:20 10及其修正案1:20 13和修正案2:20 16的基础上建立的。请国家委员会注意，设备制造商和测试组织在新的、修订的或修订的IEC出版物出版后可能需要一个过渡期，以便根据新的要求制造产品，并为进行新的或修订的测试做好准备。委员会建议，该出版物的内容应在出版之日起12个月或36个月内通过，以便在全国范围内实施。关键词:燃气、石油、固体燃料燃烧器具、安全

NEW!IEC 60335-2-102:2017 is available as IEC 60335-2-102:2017 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

IEC 60335-2-102:2017 deals with the safety of gas, oil and solid-fuel burning appliances having electrical connections, for household and similar purposes, their rated voltage being not more than 250 V for single-phase appliances and 480 V for other appliances. This standard covers the electrical safety and some other safety aspects of these appliances. All safety aspects are covered when the appliance also complies with the relevant standard for the fuel-burning appliance. If the appliance incorporates electric heating sources, safety aspects concerning these electric sources are covered when the appliance also complies with？the relevant part 2 of IEC 60335. Examples of appliances within the scope of this standard are
– central heating boilers;
– commercial catering equipment;
– cooking appliances;
– laundry and cleaning appliances;
– room heaters;
– warm air heaters;
– water heaters.
Appliances not intended for normal household use but which nevertheless may be a source of danger to the public, such as appliances intended to be used by laymen in shops, in light industry and on farms, are within the scope of this standard. This standard deals with the reasonably foreseeable hazards presented by appliances that are encountered by all persons. However, in general, it does not take into account？
– persons (including children) whose
？physical, sensory or mental capabilities; or
？lack of experience and knowledge
prevents them from using the appliance safely without supervision or instruction;
– children playing with the appliance.
Attention is drawn to the fact that
– for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary;
This standard does not apply to
– appliances intended exclusively for industrial purposes;
– appliances intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas). This second edition cancels and replaces the first edition published in 2004 including its Amendment 1 (2008) and its Amendment 2 (2012). This edition constitutes constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a spillage test is introduced for appliances that have a flat surface on which a cup may be placed (15.101); terms and definitions were renumbered and some notes have been converted to normative text or deleted (19.11.2, 22.103). This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. This part 2-102 is to be used in conjunction with the latest edition of IEC 60335-1 and its amendments. It was established on the basis of IEC 60335-1:2010, its Amendment 1:2013 and its Amendment 2:2016. The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in which to make products in accordance with the new requirements and to equip themselves for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months or later than 36 months from the date of publication.

Key words: Gas, Oil, Solid Fuel Burning Appliances, Safety