前言这是协调CSA集团和UL标准，适用于电动手持式工具、可移动工具以及草坪和花园机械-安全-第3-10部分:可移动切断机的特殊要求。这是CAN/CSA-C22的第一版。2编号62841-3-10和第一版UL 62841-3-10。本协调标准基于2015年9月发布的IEC出版物62841-3-10:电动手持式工具、可移动工具以及草坪和花园机械的第一版标准-安全-第3-10部分:可移动切断机的特殊要求。IEC出版物62841-3-10的版权归IEC所有。 范围第1部分的本条款适用，但以下情况除外:补充:IEC 62841的本部分适用于用于切割金属、混凝土和砖石等材料的可移动切断机，并配有一个41型研磨粘结加强轮或带周边间隙的金刚石切断轮（如有），不超过10 mm，且-额定空载速度不超过最大车轮直径为100 m/s的车轮圆周速度，且-车轮直径范围为250 mm至410 mm。本标准不适用于:-可移动斜切锯；-可移动式瓷砖锯可移动金属锯。注101:IEC 62841涵盖了可移动斜切锯- 3-9. 可移动式瓷砖锯将包含在IEC 62841-3的未来部分中。可移动金属锯将在IEC 62841-3的未来部分中涵盖。

PrefaceThis is the harmonized CSA Group and UL Standard For Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery — Safety — Part 3-10: Particular Requirements for Transportable Cut-Off Machines. It is the First edition of CAN/CSA-C22.2 No. 62841-3-10 and the First edition of UL 62841-3-10. This harmonized standard is based on IEC Publication 62841-3-10: First edition Standard For Electric Motor-Operated Hand-Held Tools, Transportable Tools And Lawn And Garden Machinery — Safety — Part 3-10: Particular Requirements for Transportable Cut-Off Machines issued September 2015. IEC publication 62841-3-10 is copyrighted by the IEC.ScopeThis clause of Part 1 is applicable, except as follows: Addition: This part of IEC 62841 applies to transportable cut-off machines intended to cut materials such as metals, concrete and masonry and to be fitted with one abrasive- bonded reinforced wheel of Type 41, or — diamond cut-off wheel with the peripheral gaps, if any, not exceeding 10 mmand with— a rated no-load speed not exceeding a peripheral speed of the wheel of 100 m/s with the maximum wheel diameter and — a wheel diameter range of 250 mm to 410 mm.This standard does not apply to:— transportable mitre saws; — transportable tile saws; — transportable metal saws.NOTE 101 Transportable mitre saws are covered by IEC 62841-3-9. Transportable tile saws will be covered by a future part of IEC 62841-3. Transportable metal saws will be covered by a future part of IEC 62841-3.