现行

JB/T 7387-2014

工业过程控制系统用电动控制阀
Electrical control valves for industrial - Process control systems

2014-05-06

现行

JB/T 7368-2015

工业过程控制系统用阀门定位器
Valve positioners for industry-process control systems

2015-10-10

现行

JB/T 13873-2021

工业过程控制系统用气动低温控制阀
Pneumatic cryogenic control valves for industrial-process control systems

2021-10-08

现行

BS EN 60534-8-2-2011

Industrial-process control valves-Noise considerations. Laboratory measurement of noise generated by hydrodynamic flow through control valves
工业过程控制阀

2012-08-31

现行

BS EN 60534-9-2007

Industrial-process control valves-Test procedure for response measurements from step inputs
工业过程控制阀

2009-06-30

现行

BS DD IEC/PAS 62443-3-2008

Security for industrial process measurement and control-Network and system security
工业过程测量和控制的安全性

2008-08-29

现行

GB/T 25479-2010

工业过程测量和控制系统用无纸记录仪
Paperless recorder for use in industrial-process measurement and control systems

2010-12-01

现行

JB/T 11960-2014

工业过程测量和控制安全 网络和系统安全
Security for industrial process measurement and control - Network and system security

2014-05-12

现行

BS EN 61514-2002

Industrial-process control systems. Methods of evaluating the performance of valve positioners with pneumatic outputs
工业过程控制系统 带气动输出的阀门定位器性能评估方法

2002-06-13

现行

IEC 61514-2000

Industrial-process control systems - Methods of evaluating the performance of valve positioners with pneumatic outputs
工业过程控制系统.气动输出阀门定位器性能的评定方法

2000-04-28

现行

GB/T 22137.2-2018

工业过程控制系统用阀门定位器 第2部分：智能阀门定位器性能评定方法
Valve positioners for industrial process control systems—Part 2: Methods of evaluating the performance of intelligent valve positioners

2018-06-07

现行

JB/T 6846-2014

工业过程测量和控制系统用带前置放大器动圈式指示仪
Moving coil indicators with preamplifiers for industrial-process measurement and control systems

2014-05-12

现行

IEC 60534-8-1-2005

Industrial-process control valves - Part 8-1: Noise considerations - Laboratory measurement of noise generated by aerodynamic flow through control valves
工业过程控制阀第8-1部分:噪声注意事项 - 通过控制阀的气动流量产生的噪声的实验室测量

2005-09-26

现行

GB/T 17213.8-2015

工业过程控制阀 第8-1部分：噪声的考虑 实验室内测量空气动力流流经控制阀产生的噪声
Industrial-process control valves—Part 8-1: Noise considerations—Laboratory measurement of noise generated by aerodynamic flow through control valves

2015-12-10

现行

IEC 60534-8-2-2011

Industrial-process control valves - Part 8-2: Noise considerations - Laboratory measurement of noise generated by hydrodynamic flow through control valves
工业过程控制阀 - 第8-2部分:噪声注意事项 - 通过控制阀流体动力学流量产生的噪声的实验室测量

2011-10-12

现行

GB/T 17213.14-2018

工业过程控制阀 第8-2部分：噪声的考虑 实验室内测量液动流流经控制阀产生的噪声
Industrial-process control valves—Part 8-2: Noise considerations—Laboratory measurement of noise generated by hydrodynamic flow through control valves

2018-07-13

现行

IEC 60534-9-2007

Industrial-process control valves - Part 9: Test procedure for response measurements from step inputs
工业过程控制阀 - 第9部分:来自步进输入的响应测量的测试程序

2007-09-10

现行

GB/T 17213.18-2015

工业过程控制阀 第9部分: 阶跃输入响应测量的试验程序
Industrial-process control valves—Part 9: Test procedure for response measurements from step inputs

2015-12-10

现行

JIS B 2005-8-2-2008

Industrial-process control valves -- Part 8: Noise considerations -- Section 2: Laboratory measurement of noise generated by hydrodynamic flow through control valves
工业过程控制阀第8部分:噪声考虑第2节:通过控制阀的流体动力流产生的噪声的实验室测量

2008-01-01

现行

KS C IEC TS 62872

산업 시설과 스마트 그리드 사이의 산업 공정 측정, 제어 및 자동화 시스템 인터페이스
工业设备与智能电网之间的工业过程测量 控制和自动化系统接口

2020-04-08