KS C IEC 61212-3-3-2008(2018)-绝缘材料电工用热固性树脂基工业硬质圆形层压管和棒第3部分:单项材料规范活页3:圆形层压模压棒 -国家数字标准馆

现行 KS C IEC 61212-3-3-2008(2018)

到馆提醒

收藏跟踪

购买正版

열경화성 수지재 산업용 적층 튜브 및 막대－제3부：개별재료 규정－제3절：원통 적층 몰드막대 绝缘材料电工用热固性树脂基工业硬质圆形层压管和棒第3部分:单项材料规范活页3:圆形层压模压棒

发布日期： 2008-11-20

该标准规定了基于其他种类树脂和强化剂的电气用途的工业用硬质圆形成型积层棒（刚性圆形层压模压棒）的要求事项。各用途的特点如表1所示。该标准规定的材料应满足规定的性能水平。另外，在用户选择材料的特殊情况下，最好以适合该应用的性能所需的实际要求为准，而不应仅以该标准为准。安全警告（Safety Warning）:该标准中包含或涉及的安全方法是用于安全手段的人员的责任。

이 표준은 다른 종류의 수지와 강화제에 기초한 전기적 용도의 공업용 경질 둥근 성형 적층 막대(rigid round laminated moulded rods)의 요구사항을 규정한다. 용도별 특징은 표 1과 같다. 이 표준에서 규정하는 재료는 규정된 성능수준을 만족해야 한다. 또한 사용자가 재료를 선택하는 특별 한 경우, 해당 응용에 적합한 성능에 필요한 실제 요구사항을 기준으로 하는 것이 바람직하며, 이표준만 을 기준으로 하는 것은 바람직하지 않다. 안전 경고(Safety Warning)：이 표준에 포함되거나 관련된 안전에 대한 방법은 안전에 대한 수단으로 사용하기 위해 사용하는 자의 책임이다.

分类信息

发布单位或类别：韩国-韩国标准

ICS分类： 29.035.01绝缘材料 - 绝缘材料综合

关联关系

研制信息

相似标准/计划/法规

BS EN 61212-3-3-2006

Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes-Specifications for individual materials-Round laminated moulded rods
绝缘材料电气用热固性树脂工业硬质圆形层压管和棒

BS EN 61212-3-2-2013

Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes-Specifications for individual materials. Sheet 2: Round laminated moulded tubes
绝缘材料电气用热固性树脂工业硬质圆形层压管和棒

BS EN 61212-3-1-2013

Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes-Specifications for individual materials. Sheet 1: Round laminated rolled tubes
绝缘材料电气用热固性树脂工业硬质圆形层压管和棒

BS EN 61212-2-2006

Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes-Methods of test
绝缘材料电气用热固性树脂工业硬质圆形层压管和棒

IEC 61212-3-3-2006

Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Round laminated moulded rods
绝缘材料 - 用于电气目的的基于热固性树脂的工业刚性圆形层压管和杆 - 第3部分:单个材料的规格 - 第3页:圆形层压成型棒

KS C IEC 61212-3-3(2023 Confirm)

열경화성 수지재 산업용 적층 튜브 및 막대－제3부：개별재료 규정－제3절：원통 적층 몰드막대
绝缘材料电工用热固性树脂工业硬质圆层压管和棒第3部分:单项材料规范表3:圆形层压模塑棒

IEC 61212-3-1-2013

Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 1: Round laminated rolled tubes
绝缘材料 - 用于电气目的的基于热固性树脂的工业刚性圆形层压管和杆 - 第3部分:单个材料的规格 - 第1页:圆形层压轧制管

KS C IEC 61212-3-1(2020 Confirm)

열 경화성 수지재 원통적층 튜브 및 막대－제3부：개별 요구사항－제1절：원통적층 튜브
绝缘材料电工用热固性树脂基工业硬质圆层压管和棒第3部分:单项材料规范活页1:圆层压轧管

KS C IEC 61212-3-2

절연재료 — 전기적 목적의 열경화성 수지제 원통 적층 튜브 및 막대 —제3부: 개별 재료에 대한 규격 —제2절: 원통 적층 성형 튜브
绝缘材料 - 基于用于电气用途的热固性树脂的工业刚性圆形层压管和杆 - 第3部分:单个材料的规格 - 第2页:圆形层压成型管

IEC 61212-3-2-2013

Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 3: Specifications for individual materials - Sheet 2: Round laminated moulded tubes
绝缘材料 - 基于用于电气用途的热固性树脂的工业刚性圆形层压管和杆 - 第3部分:单个材料的规格 - 第2页:圆形层压成型管

GB/T 5132.5-2009

电气用热固性树脂工业硬质圆形层压管和棒第5部分：圆形层压模制棒
Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 5: Round laminated moulded rods

KS C IEC 61212-2

열 경화성 수지제 원통적층 튜브 및 막대 —제2부: 시험방법
绝缘材料 - 基于用于电气目的的热固性树脂的工业刚性圆形层压管和杆 - 第2部分:测试方法

IEC 61212-2-2006

Insulating materials - Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes - Part 2: Methods of test
绝缘材料.电气用基于热固性树脂的工业刚性圆形层压管和棒.第2部分:试验方法

BS EN 61212-1-2006

Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes-Definitions, designations and general requirements
绝缘材料电气用热固性树脂工业硬质圆形层压管和棒

UNE-EN 61212-3-3-1996

INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 3: ROUND LAMINATED MOULDED RODS.
电气用热固性树脂工业硬质圆形层压管和棒第3部分:单项材料规范表3:圆形层压成型杆

BS 10/30216000 DC

BS EN 61212-3-2. Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Part 3-2. Specifications for individual materials. Round laminated moulded tubes
英国标准EN 61212-3-2 绝缘材料电气用热固性树脂工业硬质圆形层压管和棒第3-2部分个别材料的规格圆形层压成型管

BS 10/30215996 DC

BS EN 61212-3-1. Insulating materials. Industrial rigid round laminated tubes and rods based on thermosetting resins for electrical purposes. Part 3-1. Specifications for individual materials. Round laminated rolled tubes
英国标准EN 61212-3-1 绝缘材料电气用热固性树脂工业硬质圆形层压管和棒第3-1部分个别材料的规格圆层压轧管

UNE-EN 61212-3-2-1996

INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 2: ROUND LAMINATED MOULDED TUBES.
电气用热固性树脂工业硬质圆形层压管和棒第3部分:单项材料规范第2页:圆形层压成型管

UNE-EN 61212-3-1-1996

INDUSTRIAL RIGID ROUND LAMINATED TUBES AND RODS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES. PART 3: SPECIFICATIONS FOR INDIVIDUAL MATERIALS. SHEET 1: ROUND LAMINATED ROLLED TUBES.
电气用热固性树脂工业硬质圆形层压管和棒第3部分:单项材料规范活页1:圆形层压轧制管

KS C IEC 61212-1

절연재료 — 전기적 목적의 열경화성 수지제 원통 적층 튜브 및 막대 — 제1부: 정의, 명칭과 일반 요구사항
绝缘材料 - 基于电气用途的热固性树脂的工业刚性圆形层压管和杆 - 第1部分:定义名称和一般要求

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统