IEC 60730-2-5:20 13适用于自动电燃烧器控制系统，用于自动控制家用和类似用途（包括供暖、空调和类似用途）的油、气、煤或其他可燃物的燃烧器。第2-5部分适用于完整的燃烧器控制系统和单独的编程单元。本第2-5部分也适用于单独的电子高压点火源和单独的火焰探测器。 独立点火装置（电极、引燃燃烧器等。）不在本第2-5部分的范围内，除非它们作为燃烧器控制系统的一部分提交。独立点火变压器的要求包含在IEC 60989中。本第2-5部分不包括利用热电火焰监控的系统。 本第2-5部分适用于固有安全性、制造商声明的与燃烧器安全相关的操作值、操作时间和操作顺序以及自动电燃烧的测试燃烧器中、燃烧器上或与燃烧器相关联的er控制系统。它是在该出版物第四版（2010年）的基础上建立的。可以考虑IEC 60730-1的未来版本或修订。IEC 60730-2-5 Ed4.0的标题已更新为IEC 60730-1 Ed5.0的标题。然而，IEC 60730-2-5 Ed4.0尚未根据IEC 60730-1 Ed5.0中的技术要求进行更新。 本第2-5部分补充或修改了IEC 60730-1中的相应条款，以便将该出版物转换为IEC标准:自动电燃烧器控制系统的安全要求。 关键词:自动控制燃烧器控制 本出版物应与IEC 60730-1:20 13一起阅读。

IEC 60730-2-5:2013 applies to automatic electrical burner control systems for the automatic control of burners for oil, gas, coal or other combustibles for household and similar use including heating, air conditioning and similar use. This part 2-5 is applicable to a complete burner control system and to a separate programming unit. This part 2-5 is also applicable to a separate electronic high-voltage ignition source and to a separate flame detector. Separate ignition devices (electrodes, pilot burners, etc.) are not covered by this part 2-5 unless they are submitted as part of a burner control system. Requirements for separate ignition transformers are contained in IEC 60989. Systems utilizing thermoelectric flame supervision are not covered by this part 2-5. This part 2-5 applies to the inherent safety, to the manufacturer's declared operating values, operating times and operating sequences where such are associated with burner safety and to the testing of automatic electrical burner control systems used in, on, or in association with, burners. It was established on the basis of the fourth edition (2010) of that publication. Consideration may be given to future editions of, or amendments to, IEC 60730-1. The title of IEC 60730-2-5 Ed4.0 has been updated to the title of IEC 60730-1 Ed5.0. However, IEC 60730-2-5 Ed4.0 has not been updated in accordance with the technical requirements in IEC 60730-1 Ed5.0. This part 2-5 supplements or modifies the corresponding clauses in IEC 60730-1 so as to convert that publication into the IEC standard: Safety requirements for automatic electrical burner control systems. Key words: Automatic control, Burner control

This publication is to be read in conjunction with IEC 60730-1:2013.