BS EN 16508:2015规定了临时屋顶的性能要求和设计方法 和封装。可以通过几种方式形成结构:由现有永久性结构支撑的临时屋顶（图1）；由脚手架支撑的临时屋顶（图2和图3）；由另一个临时结构（如钢架）支撑的临时屋顶；由独立结构支撑的临时墙（图4）；封装是一个完整的临时结构，包括屋顶、墙壁和相应的 临时支架（图5）。本欧洲标准规定了一般要求。这些基本上独立于 建筑所用的材料。本标准旨在作为 咨询和设计。交叉引用:EN 1990EN 1991EN 1993EN 1995EN 1999EN 12811- 1:2003EN 12811-2EN 12812:2008EN 13782购买本文件时可获得的所有现行修改件均包含在购买本文件中。

BS EN 16508:2015 specifies performance requirements and design methods for temporary roofs and encapsulations.It is possible to form the constructions in several ways:temporary roof which is supported by an existing permanent construction (Figure 1);temporary roof which is supported by a scaffold (Figure 2 and 3);temporary roof which is supported by another temporary construction (e.g. steel frame);temporary wall which is supported by a separate construction (Figure 4);encapsulation which is a complete temporary construction including roof, walls and corresponding temporary supports (Figure 5).This European Standard sets out general requirements. These are substantially independent of the materials of which the construction is made. This standard is intended to be used as the basis for enquiry and design.Cross References:EN 1990EN 1991EN 1993EN 1995EN 1999EN 12811-1:2003EN 12811-2EN 12812:2008EN 13782All current amendments available at time of purchase are included with the purchase of this document.