This part of IEC 60684 gives the requirements for heat-shrinkable, polyolefin sleeving, antitracking with a nominal shrink ratio of 3:1.
This sleeving has been found suitable for use at temperatures up to 100 °C.
Typically: medium wall, internal diameter up to 110 mm.
This sleeving is normally supplied in the colours red or brown.
Since these types of sleeving cover a significantly large range of sizes and wall thicknesses, Annex A (Table A.1) provides guidance on the range of sizes available. The actual size will be agreed between the user and the supplier.
Materials which conform to this specification meet established levels of performance. However, the selection of a material by a user for a specific application will be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.
This sleeving is designed to be used in medium voltage cable accessories and as such electrical performance willbe proven as part of the assembly. Examples of this are described in HD 629.1 and IEC 60502 (all parts).Cross References:IEC 60684-1:2003EN 60296:2012EN 60684-1:2003ISO 4892-3:2016IEC 60684-2:2011EN 60684-2:2011HD 457 S1:1985IEC 60757:1983EN ISO 4892-3:2016ISO 846:2019EN ISO 846:2019IEC 60296:2012HD 629.1EN 60684-3-420 to 422 (series)IEC 60684-3 (all sheets)IEC 60684-3 (series)IEC 60502 (all parts)All current amendments available at time of purchase are included with the purchase of this document.