System of cone tolerances and cone fits for conical workpieces of cones from C = 1 : 3 to 1 : 500 and lengths from 6 to 630 mm; system of cone fits
C=1:3至1:500、长度为6至630 mm的锥形工件的锥形公差和锥形配合系统；锥形配合系统

1986-08-01

System of cone tolerances and cone fits for conical workpieces of cones from C = 1 : 3 to 1 : 500 and lengths from 6 to 630 mm; effect of the deviations on cone with regard to the cone fit
C=1:3至1:500、长度为6至630 mm的锥形工件的锥形公差和锥形配合系统；锥面配合偏差对锥面的影响

1986-08-01

System of cone tolerances and cone fits for conical workpieces from C = 1 : 3 to 1 : 500 and lengths from 6 to 630 mm; system of cone tolerances
C=1:3至1:500、长度为6至630 mm的锥形工件的锥形公差和锥形配合系统；圆锥公差系统

1974-12-01

System of cone tolerances and cone fits for conical workpieces of cones from C = 1 : 3 to 1 : 500 and lengths from 6 to 630 mm; vocabulary in German, English, French, Italian, Russian, Spanish
C=1:3至1:500、长度为6至630 mm的锥形工件的锥形公差和锥形配合系统；德语、英语、法语、意大利语、俄语、西班牙语的词汇

1976-02-01

Limits and fits. Guidance for system of cone (taper) fits and tolerances for cones from C = 1:3 to 1:500, lengths from 6 mm to 630 mm and diameters up to 500 mm
限制和配合 C=1:3至1:500、长度为6毫米至630毫米、直径为500毫米的圆锥（锥形）配合系统和公差指南

2009-09-30