现行

GB/T 28052-2011

非重复充装焊接钢瓶充装规定
Regulation for filling of non-refillable steel welded cylinder

2011-12-30

现行

GB/T 34528-2017

Regulation for filling of cylinder bundle

2017-10-14

现行

GB/T 34528-2017

气瓶集束装置充装规定
Regulation for filling of cylinder bundle

2017-10-14

现行

GB/T 24159-2022

焊接绝热气瓶
Welded insulated cylinders

2022-07-11

现行

AS 2030.4-1985[ Pending Revision ]

The verification, filling, inspection, testing and maintenance of cylinders for storage and transport of compressed gases, Part 4: Welded cylinders - Insulated
压缩气体储存和运输用气瓶的验证、填充、检验、试验和维护第4部分:焊接气瓶-绝缘

1985-01-30

现行

BS EN ISO 24431-2016

Gas cylinders. Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene). Inspection at time of filling
气瓶 压缩和液化气体（乙炔除外）用无缝、焊接和复合气瓶 灌装时的检查

2016-12-31

现行

ISO 24431-2016

Gas cylinders — Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene) — Inspection at time of filling
气瓶 - 压缩和液化气体（不含乙炔）的无缝 焊接和复合气瓶 - 填充时的检查

2016-11-02

现行

CGA ISO-10691

Gas cylinders-Refillable welded steel cylinders for liquefied petroleum gas (LPG)-Procedures for checking before, during and after filling
气瓶液化石油气（LPG）用可重复充装焊接钢瓶.充装前、充装中和充装后的检查程序

2004-08-15

现行

ISO 10691-2004

Gas cylinders — Refillable welded steel cylinders for liquified petroleum gas (LPG) — Procedures for checking before, during and after filling
气瓶——液化石油气（LPG）用可再填充焊接钢瓶——填充前、填充期间和填充后的检查程序

2004-08-24

现行

DIN EN ISO 24431

Gas cylinders - Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling (ISO 24431:2016)
气瓶.压缩和液化气体（不包括乙炔）用无缝焊接和复合气瓶.充装时的检验（ISO 24431-2016）

2017-07-01

现行

GB/T 34530.1-2017

低温绝热气瓶用阀门 第1部分：调压阀
Valve for cryogenic insulated cylinder—Part 1：Pressure regulating valve

2017-12-29

现行

KS B ISO 2503

가스 용접 장비 30 MPa 이하에서의 용접, 절단 등에 사용되는 가스 실린더용 압력 조정기
气焊设备用于焊接、切割和相关工艺的气瓶的压力调节器 压力不超过300巴

2022-12-19

现行

KS B ISO 2503(2017 Confirm)

가스 용접 장비－30 MPa 이하에서의 용접, 절단 등에 사용되는 가스 실린더용압력 조정기
气焊设备－焊接、切割及相关工艺用300巴以下气瓶的压力调节器

2007-06-29

现行

BS EN ISO 2503-2009+A1-2015

Gas welding equipment. Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa)
气焊设备 压力调节器和带有流量计量装置的压力调节器 用于300巴（30兆帕）以下的焊接、切割和相关工艺中的气瓶

2015-05-31

现行

ISO 2503-2009

Gas welding equipment — Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa)
气焊设备——压力调节器和带有流量计量装置的压力调节器 用于300 bar（30 MPa）以下的焊接、切割和相关工艺中的气瓶

2009-07-02

现行

ISO 2503-2009/Amd 1-2015

Gas welding equipment — Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa) — Amendment 1
气焊设备.300巴（30兆帕）以下焊接、切割和相关工艺用气瓶用压力调节器和带流量测量装置的压力调节器.修改件1

2015-04-15

现行

GOST R 54791-2011

Оборудование для газовой сварки, резки и родственных процессов. Редукторы и расходомеры для газопроводов и газовых баллонов с давлением газа до 300 бар (30 МПа)
用于焊接 切割和相关工艺的气体焊接设备 压力调节器和压力调节器 带有用于歧管系统的流量计量装置和高达300巴（30МРа）的气瓶

现行

UNE-EN ISO 2503-2010

Gas welding equipment - Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa) (ISO 2503:2009)
气焊设备.300巴（30兆帕）以下焊接、切割和相关工艺用气瓶用压力调节器和带流量计量装置的压力调节器（ISO 2503-2009）

2010-06-23

现行

DIN EN 13918-DRAFT

Draft Document - Gas welding equipment - Integrated flowmeter regulators used on cylinders for welding, cutting and allied processes - Classification, specification and tests; German version prEN 13918:2000
文件草案——气焊设备——用于焊接、切割和相关工艺的气瓶上的集成流量计调节器——分类、规范和试验；德文版prEN 13918:2000

2001-01-01