首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 ISO 3873:2025
到馆提醒
收藏跟踪
购买正版
Industrial protective helmets 工业防护头盔
发布日期: 2025-02-25
本文件规定了工业防护头盔的物理和性能要求、试验方法和标记要求。本文件描述了两种头盔类型的要求。 I型-旨在保护佩戴者头部的上部免受工业环境中可能发生的冲击,例如坠落物体。 II型——旨在保护头部免受工业环境中可能发生的冲击,如坠落物体或坠落。 注II型头盔旨在提供保护,防止从站立或低高度跌落,例如站立高度升高一米。II型头盔并非旨在在所有跌落中为头部提供保护,并且不太可能防止在不受控制地从一个高度跌落到另一个高度或从梯子或脚手架上的高处跌落中严重的头部损伤或死亡。在高空作业和管理两米以上坠落风险的情况下,应将选择II型头盔视为整体安全工作系统的一部分。

This document specifies physical and performance requirements, test methods and marking requirements for industrial protective helmets. This document describes the requirements for two helmet types.

Type I — intended to protect the upper part of wearer’s head against impacts that may occur in an industrial setting, such as a falling object.

Type II — intended to protect the head against impacts that may occur in an industrial setting, such as a falling object or a fall.

NOTE            The Type II helmet is intended to offer protection from falls from standing or a low height, e.g. standing height elevated by up to one metre. The Type II helmet is not intended to offer protection to the head in all falls and is unlikely to prevent serious head injury or death in uncontrolled falls from one level to another or from a position elevated on a ladder or scaffolding. The selection of a Type II helmet should be considered as one part of an overall safe system of work in the context of working at heights and managing the risks of falls from greater than two metres.

分类信息
关联关系
研制信息
归口单位: ISO/TC 94
相似标准/计划/法规
现行
AS/NZS 1801-1997[ Pending Revision ]
Occupational protective helmets
职业防护头盔
1997-09-05
现行
BS PAS 016-1995
Integrated protection helmets
综合防护头盔
1995-12-15
现行
GB/T 30041-2013
头部防护 安全帽选用规范
Head Protection—Code of practice for selection and use of industrial safety helmets
2013-12-17
现行
UNE-EN 397-1995
INDUSTRIAL SAFETY HELMETS.
工业安全头盔
1995-12-14
现行
BS EN 397-2012+A1-2012
Industrial safety helmets
工业安全头盔
2013-01-31
现行
UNE-EN 397-1996 ERRATUM
INDUSTRIAL SAFETY HELMETS.
工业安全头盔
1996-05-14
现行
JIS T 8131-2015
Industrial safety helmets
工业安全头盔
2015-01-01
现行
KS G ISO 3873
산업용 안전모
工业安全帽
2021-03-23
现行
GB 2811-2019
头部防护 安全帽
Head protection—Safety helmets
2019-12-31
现行
AS/NZS 4067-2012
Protective helmets for structural firefighting
结构消防用防护头盔
2012-04-30
现行
AS/NZS 1698-2006
Protective helmets for vehicle users
车辆使用者防护头盔
2006-02-20
现行
AS 4067-2012[ Pending Revision ]
Protective helmets for structural firefighting
结构消防用防护头盔
2012-04-30
现行
CAN/CSA Z611-02(R2012)
Riot Helmets and Faceshield Protection
防暴头盔和面罩防护
2002-10-01
现行
JIS T 8134-2018
Protective helmets for bicycle users
自行车使用者防护头盔
2018-01-01
现行
NZS 5430-1992
Protective helmets for vehicle users
车辆使用者防护头盔
1992-01-31
现行
KS G 7004
자전거용 안전모
自行车用户的防护头盔
2021-03-23
现行
KS G 7001
승차용 안전모
车辆使用者防护头盔
2021-12-20
现行
GB/T 38305-2019
头部防护 救援头盔
Head protection—Rescue helmets
2019-12-10
现行
AS/NZS 2512.7.1-2006
Methods of testing protective helmets, Method 7.1: Determination of stability of protective helmets - Static stability
防护头盔的试验方法 方法7.1:防护头盔稳定性的测定.静态稳定性
2006-06-13
现行
AS/NZS 2512.7.2-2009
Methods of testing protective helmets, Method 7.2: Determination of stability of protective helmets - Dynamic stability
防护头盔的试验方法 方法7.2:防护头盔稳定性的测定.动态稳定性
2009-04-07