BS EN 12779:2015涉及与环境相关的重大危险、危险情况和事件 用于固定安装和与机器连接的切屑和除尘系统 实木（包括硬木）、木基材料和类似木材的材料（使用时） 在制造商预期的条件下，包括合理可预见的 误用本欧洲标准还涉及将环境危害降至最低的技术要求 与在筒仓、料仓或容器中临时储存木屑、木屑和刨花有关 包括充电和放电系统。本欧洲标准不适用于:装有室内过滤器的芯片和除尘系统（包含在prEN 16770中）；木工机器内的抽气设备（例如抽气罩、管道），包括 抽气系统连接的出口；芯片和除尘系统设计用于KST值超过200巴/秒- 1.过滤器和储存设施之间的机械输送系统；低压低于0.3巴或超压的抽气系统和输送系统 高于0.3巴；压制木制品（如颗粒）和潮湿刨花的储存装置。本标准未涉及容器的要求。本欧洲标准不适用于在出厂日期之前制造的机器 以英文出版。1:2008 2008 2008年11 11:1 1:2008 2008年11 11 11:1 1:11 11 11 11:1:1:11 11 11:1:11 11 11 11:1:11 11 11:11 11 11 11:11 11 11 11 11:11 11 11 11 11 11 11 11:11 11 11 11 11 11:11 11 11 11:11 11 11 11:11 11 11 11:11 11 11 11 11:11 11 11 11 11 11:11 11 11 11 11 11:11 11 11 11 11 11 11 11 11 11:11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11:11 11 11 11 11 11 11 11:11 11 11 11 11 11 11 11 11:11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11:11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 EC 60529:1989EN62305-1:2011IEC 62305-1:2010EN ISO 4414:2010EN ISO 12100:2010ISO 12100:2010EN ISO 13849-1:2008ISO 13849-1:2006EN ISO 13850: ISO 14122-2:10 10-10-10 10 10 10:10 10 10:10 10 10-10-10-10 10-10-10 10-10-10 10-10-10-10 10-10-10:2009年12 12 12:10 10 10 10:12 12 12 12 12:10 10 10 10 10:10 10 10 10 10:10 10:10 10 10 10:2009年12 12:10 10 10 10 10:10 11 11 11 11 11.1 ISO 14122-3:12-10 10:10 10 10 10 10:11 11 11 11 11 11 11 11:12:11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11:12:12:12:12:12:10 10 10 10 10 10 10 10 10 10:1 1 1国际ISO 14122-10 10 10 10 10 10 10 10 10 10 10:12:11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11 11.13:12:12:12 11688-2:1998EN 848-3:2012EN 13237:2012EN 60079-0:2012IEC 60079-0:2011EN ISO 4871:2009ISO4871:1996ISO 2602:19802004/108/EC94/9/EC1999/92/ECA购买本文件时提供的所有现行修订均包含在购买本文件中。

BS EN 12779:2015 deals with the significant hazards, hazardous situations and events relevant for chip and dust extraction systems for fixed installation and for connection with machines for working on solid wood (including hard wood), wood-based materials and wood-like materials, when they are used as intended and under the conditions foreseen by the manufacturer, including reasonably foreseeable misuse.This European Standard deals also with the technical requirements to minimize the hazards in connection with the temporary storage of wood dust, chips and shavings in a silo, bin or container including charging and discharge systems.This European standard does not apply to:chip and dust extraction systems with filters installed indoors (covered by prEN 16770);extraction equipment (e.g. extraction hoods, ducts) within a woodworking machine including the outlet to which the extraction system is connected;chip and dust extraction systems designed for KST values above 200 bar ms-1;mechanical conveying systems between filter and storage facility;extraction systems and conveying systems with underpressure below 0,3 bar or overpressure above 0,3 bar;storage devices for pressed wood products (e.g. pellets) and humid shavings.Requirements for containers are not dealt with in this standard.This European Standard is not applicable to machines which are manufactured before the date of its publication as EN.Cross References:EN 617:2001+A1:2010EN 953:1997+A1:2009EN 1093-7:1998+A1:2008EN 1127-1:2011EN 1366-1:2014EN 1366-2:2015EN 1366-7:2004EN 1870-4:2012EN 1991-4:2006EN 12750:2013EN 13463-1:2009EN 14373:2005EN 14460:2006EN 14491:2012EN 14797:2006EN 14986:2007EN 15089:2009EN 16009:2011EN 16020:2011EN 16447:2014EN 60079-14:2014IEC 60079-14:2013EN 60204-1:2006IEC 60204-1:2005EN 60529:1991IEC 60529:1989EN 62305-1:2011IEC 62305-1:2010EN ISO 4414:2010ISO 4414:2010EN ISO 12100:2010ISO 12100:2010EN ISO 13849-1:2008ISO 13849-1:2006EN ISO 13850:2008ISO 13850:2006EN ISO 14119:2013ISO 14119:2013EN ISO 14122-2:2001ISO 14122-2:2001EN ISO 14122-3:2001ISO 14122-3:2001EN ISO 14122-4:2004ISO 14122-4:20042006/42/ECprEN 16770EN 12792:2003EN 13779:2007EN 60079-10-2:2009IEC 60079-10-2:2009EN ISO 11688-1:2009ISO/TR 11688-1:1995EN ISO 11688-2:2000ISO/TR 11688-2:1998EN 848-3:2012EN 13237:2012EN 60079-0:2012IEC 60079-0:2011EN ISO 4871:2009ISO 4871:1996ISO 2602:19802004/108/EC94/9/EC1999/92/ECAll current amendments available at time of purchase are included with the purchase of this document.