首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 BS 05/30131025 DC
到馆提醒
收藏跟踪
购买正版
EN 725-2. Advanced technical ceramics. Methods of test for ceramic powders. Part 2. Determination of impurities in barium titanate EN 725-2 高级技术陶瓷 陶瓷粉末的试验方法 第二部分 钛酸钡中杂质的测定
发布日期: 2005-11-02
交叉引用:EN ISO/IEC 17025ISO/DIS 13527购买本文件时可获得的所有现行修订均包含在购买本文件中。
Cross References:EN ISO/IEC 17025ISO/DIS 13527All current amendments available at time of purchase are included with the purchase of this document.
分类信息
发布单位或类别: 英国-英国标准学会
关联关系
研制信息
相似标准/计划/法规
现行
BS 05/30117347 DC
EN 725-10. Advanced technical ceramics. Methods of test for ceramic powders. Part 10. Determination of compaction properties
EN 725-10 高级技术陶瓷 陶瓷粉末的试验方法 第十部分 压实特性的测定
2005-07-14
现行
BS 05/30117337 DC
EN 725-1. Advanced technical ceramics. Methods of test for ceramic powders. Part 1. Determination of impurities in alumina
EN 725-1 高级技术陶瓷 陶瓷粉末的试验方法 第一部分 氧化铝中杂质的测定
2005-07-14
现行
BS 05/30117328 DC
EN 725-5. Advanced technical ceramics. Methods of test for ceramic powders. Part 5. Determination of the particle size distribution
EN 725-5 高级技术陶瓷 陶瓷粉末的试验方法 第五部分 粒度分布的测定
2005-02-22
现行
DIN EN 725-12
Advanced technical ceramics - Methods of test for ceramic powders - Part 12: Chemical analysis of zirconia; English version of DIN EN 725-12
高级工业陶瓷.陶瓷粉末的试验方法.第12部分:氧化锆的化学分析;德文版EN 725-12:2001
2001-06-01
现行
BS 05/30117325 DC
EN 725-3. Advanced technical ceramics. Methods of test for ceramic powders. Part 3. Determination of the oxygen content of non-oxides by thermal extraction with a carrier gas
EN 725-3 高级技术陶瓷 陶瓷粉末的试验方法 第三部分 用载气热萃取法测定非氧化物中的氧含量
2005-02-23
现行
DIN EN 725-4
Advanced technical ceramics - Methods of test for ceramic powders - Part 4: Determination of oxygen content in aluminium nitride by XRF analysis; German version EN 725-4:2006
高级工业陶瓷.陶瓷粉末的试验方法.第4部分:用XRF分析法测定氮化铝中的氧含量;德文版EN 725-4:2006
2006-07-01
现行
JIS R 1701-2-2016
Fine ceramics (advanced ceramics, advanced technical ceramics) -- Test method for air purification performance of photocatalytic materials -- Part 2: Removal of acetaldehyde
精细陶瓷(高级陶瓷、高级工业陶瓷)光催化材料空气净化性能试验方法第2部分:乙醛的去除
2016-01-01
现行
ISO 5618-2-2024
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for GaN crystal surface defects — Part 2: Method for determining etch pit density
精细陶瓷(高级陶瓷、高级工业陶瓷)GaN晶体表面缺陷试验方法第2部分:蚀坑密度的测定方法
2024-04-30
现行
KS L ISO 22197-2
파인 세라믹스 — 반도성 광촉매 재료의 공기 정화 성능 시험방법 —제2부: 아세트알데하이드 제거
精细陶瓷(先进陶瓷 先进技术陶瓷) - 半导体光催化材料的空气净化性能试验方法 - 第2部分:去除乙醛
2020-12-30
现行
ISO 22197-2-2019
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials — Part 2: Removal of acetaldehyde
精细陶瓷(先进陶瓷 先进技术陶瓷) - 半导体光催化材料的空气净化性能试验方法 - 第2部分:去除乙醛
2019-10-15
现行
DIN EN 1007-2
Advanced technical ceramics - Ceramic composites; Methods of test for reinforcement - Part 2: Determination of linear density
先进技术陶瓷——陶瓷复合材料;钢筋的试验方法.第2部分:线密度的测定;德文版EN 1007-2:2002
2002-12-01
现行
JIS R 1703-2-2014
Fine ceramics (advanced ceramics, advanced technical ceramics) -- Test method for self-cleaning performance of photocatalytic materials -- Part 2: Decomposition of wet methylene blue
精细陶瓷(高级陶瓷、高级工业陶瓷)光催化材料自清洁性能试验方法第2部分:湿亚甲基蓝的分解
2014-01-01
现行
BS 05/30138935 DC
EN 15335. Advanced technical ceramics. Ceramic composites. Elastic properties by resonant beam method up to 2 000 C
EN 15335 高级技术陶瓷 陶瓷复合材料 共振梁法的弹性特性高达2000摄氏度
2005-09-14
现行
BS 08/30185921 DC
BS EN 1071-9. Advanced technical ceramics. Methods of test for ceramic coatings. Part 9. Determination of fracture strain
英国标准EN 1071-9 高级技术陶瓷 陶瓷涂层的试验方法 第九部分 断裂应变的测定
2008-12-24
现行
KS L ISO 17168-2
파인 세라믹스 — 실내 광 환경에서 반도성 광촉매 재료의 공기 정화 성능 시험방법 —제2부: 아세트알데하이드 제거
精细陶瓷(先进陶瓷 先进技术陶瓷) - 室内照明环境下半导体光催化材料空气净化性能试验方法 - 第2部分:去除乙醛
2020-12-30
现行
ISO 17168-2-2018
Fine ceramics (advanced ceramics, advanced technical ceramics) — Test method for air-purification performance of semiconducting photocatalytic materials under indoor lighting environment — Part 2: Removal of acetaldehyde
陶瓷-室内光环境中反圣光催化剂材料的空气净化性能测试方法-第二部分:去除乙酰醛
2018-09-19
现行
BS 08/30185924 DC
BS EN 1071-10. Advanced technical ceramics. Methods of test for ceramic coatings. Part 10. Determination of coating thickness by cross sectioning
英国标准EN 1071-10 高级技术陶瓷 陶瓷涂层的试验方法 第十部分 用横截面法测定涂层厚度
2008-12-24
现行
BS 08/30183873 DC
BS EN 1007-5. Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Part 5. Determination of distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at ambient temperature
英国标准EN 1007-5 高级技术陶瓷 陶瓷复合材料 钢筋的试验方法 第五部分 在环境温度下测定复丝丝束中长丝的抗拉强度和断裂拉伸应变分布
2008-08-14
现行
BS 09/30210248 DC
BS EN 1007-7. Advanced technical ceramics. Ceramic composites. Methods of test for reinforcements. Part 7. Determination of the distribution of tensile strength and of tensile strain to failure of filaments within a multifilament tow at high temperature
英国标准EN 1007-7 高级技术陶瓷 陶瓷复合材料 钢筋的试验方法 第七部分 在高温下测定复丝丝束中长丝的拉伸强度和拉伸应变的分布
2009-12-08