现行

ASTM E906/E906M-21

Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method
用热电堆法测定材料和产品的热和可见烟雾释放率的标准试验方法

2021-12-01

现行

ASTM E1354-24

Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
使用氧消耗量热仪的材料和产品的热和可见烟雾释放速率的标准测试方法

2024-10-01

现行

ULC 142

Standard Method of Fire Test for Heat and Visible Smoke Release for Discrete Products (CAN/ULC-S142:2016)
离散产品热释放和可见烟雾释放的标准燃烧试验方法（CAN/ULC-S142-2016）

2016-09-01

现行

ULC Subject 142

STANDARD METHOD OF FIRE TEST FOR HEAT AND VISIBLE SMOKE RELEASE FOR DISCRETE PRODUCTS (Bulletin, 9/9/2016)
离散产品热释放和可见烟雾释放的标准燃烧试验方法（公告 2016年9月9日）

2016-09-09

现行

ULC ORD-C2043-0

Fire Test for Smoke and Visible Heat Release for Discrete Products and their Accessories Installed in Air-Handling Spaces
安装在空气处理空间的离散产品及其附件的烟雾和可见热释放的防火试验

现行

BS ISO 5660-1-2015+A1-2019

Reaction-to-fire tests. Heat release, smoke production and mass loss rate-Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
对火灾测试的反应 热释放、烟雾产生和质量损失率

2021-02-02

现行

AS 2428.3-2004

Methods of testing smoke/heat release vents, Method 3: Determination of operating characteristics
烟雾/放热通风口的试验方法 方法3:工作特性的测定

2004-05-06

现行

NFPA(Fire) 272

NFPA 272: Standard Method of Test for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter, 2003 edition
NFPA 272:使用耗氧量热计测试材料和产品的热量和可见烟雾释放率的标准方法 2003年版

2003-04-15

现行

AS 2428.4-2004

Methods of testing smoke/heat release vents, Method 4: Determination of the effect of flame contact
烟雾/热释放通风口的试验方法 方法4:火焰接触影响的测定

2004-05-06

现行

KS F ISO 5660-1

연소성능시험 — 열방출률, 연기발생률, 질량감소율 — 제1부: 열방출률(콘칼로리미터법) 및 연기발생률(동적 측정)
着火反应试验.热释放 烟雾产生和质量损失率.第1部分:热释放率（锥形量热计法）和烟雾产生率（动态测量）

2021-12-20

现行

ISO 5660-1-2015

Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement)
反火试验 - 放热 烟雾产生和质量损失率 - 第1部分:热释放速率（锥形量热法）和烟雾产生率（动态测量）

2015-03-20

现行

KS F ISO 5660-1

연소성능시험 — 열방출률, 연기발생률, 질량감소율 — 제1부: 열방출률(콘칼로리미터법) 및연기발생률(동적 측정)
反火测试 - 放热 烟雾产生和质量损失率 - 第1部分:热释放速率（锥形量热计方法）和烟雾产生率（动态测量）

2018-02-23

现行

AS 2428.1-2004

Methods of testing smoke/heat release vents, Method 1: Determination of resistance to leakage during rain
烟雾/热释放通风口的试验方法 方法1:雨中抗泄漏性的测定

2004-05-06

现行

AS/NZS 1530.3-1999

Methods for fire tests on building materials, components and structures, Part 3: Simultaneous determination of ignitability, flame propagation, heat release and smoke release
建筑材料、构件和结构防火试验方法第3部分:可燃性、火焰传播、热释放和烟雾释放的同时测定

1999-11-05

现行

BS PD ISO/TS 5660-5-2020

Reaction-to-fire tests. Heat release, smoke production and mass loss rate-Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) under reduced oxygen atmospheres
对火灾测试的反应 热释放、烟雾产生和质量损失率

2020-04-23

现行

ISO 5660-1-2015/Amd 1-2019

Reaction-to-fire tests — Heat release, smoke production and mass loss rate — Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) — Amendment 1
着火反应试验.热释放 烟雾产生和质量损失率.第1部分:热释放率（锥形量热计法）和烟雾产生率（动态测量）.修改件1

2019-08-06

现行

GOST R ISO 5660-1-2020

Испытания по определению реакции на огонь. Интенсивности тепловыделения, дымообразования и потери массы. Часть 1. Определение интенсивности тепловыделения методом конического калориметра и интенсивности дымообразования измерениями в динамическом режиме
对火灾试验的反应 热释放、烟气产生和质量损失率 第1部分 锥形量热计法测定热释放速率和动态测量烟气产生速率

现行

AS 2428.2-2004

Methods of testing smoke/heat release vents, Method 2: Determination of ability to operate under wind loading
烟雾/热释放通风口的试验方法 方法2:在风荷载下运行能力的测定

2004-05-06

现行

AS 2428.5-2004

Methods of testing smoke/heat release vents, Method 5: Determination of discharge coefficient and effective aerodynamic area
烟雾/热释放通风口的试验方法 方法5:流量系数和有效空气动力面积的测定

2004-05-06

现行

AS 2428.6-2004

Methods of testing smoke/heat release vents, Method 6: Determination of ability to operate under snow loading
烟雾/热释放通风口的试验方法 方法6:在雪荷载下运行能力的测定

2004-05-06