BS 6160-3:1990-用于移动服务的无线电设备 A3E或F3E排放接收器的测量方法-国家数字标准馆

现行 BS 6160-3:1990

到馆阅读

收藏跟踪

购买正版

Radio equipment used in mobile services-Methods of measurement for receivers for A3E or F3E emissions 用于移动服务的无线电设备 A3E或F3E排放接收器的测量方法

发布日期： 2002-05-10

对于音频带宽通常不超过10 kHz的接收器，用于使用（a）角度调制（相位/频率调制）或（b）带全载波的双边带振幅调制接收语音和其他类型的信号。结合BS 6160-1阅读交叉参考:IEC 60315-1IEC 60315-2IEC 60489-1IEC 60489-2IEC 60489-6IEC 60716

For receivers having audio-frequency band widths generally not exceeding 10 kHz for reception of voice and other types of signal using (a) angle modulation (phase/frequency modulation), or (b) double-side band amplitude modulation with full carrier. To be read in conjunction with BS 6160-1Cross References:IEC 60315-1IEC 60315-2IEC 60489-1IEC 60489-2IEC 60489-6IEC 60716

分类信息

发布单位或类别：英国-英国标准学会

关联关系

研制信息

相似标准/计划/法规

BS IEC 60489-6-1999

Radio equipment used in mobile services. Methods of measurement-Data equipment
用于移动服务的无线电设备测量方法

Radio equipment used in mobile services-Methods of measurement for antennas
用于移动服务的无线电设备天线测量方法

IEC 60489-6-1999

Radio equipment used in mobile services - Methods of measurement - Part 6: Data equipment
移动服务中使用的无线电设备.测量方法.第6部分:数据设备

SJ/Z 9095.8-1987

移动业务无线设备的测量方法第八部分：天线的测量方法
Methods of measurement for radio equipment used in mobile services--Part 8: Methods of measurement for antennas

IEC 60489-8-1984

Methods of measurement for radio equipment used in the mobile services. Part 8: Antennas
用于移动业务的无线电设备的测量方法第8部分:天线

UNE 20590-1-1995

METHODS OF MEASUREMENT FOR RADIO EQUIPMENT USED IN THE MOBILE SERVICES. GENERAL DEFINITIONS AN STANDARD CONDITIONS OF MEASUREMENT.
移动服务中使用的无线电设备的测量方法一般定义和标准测量条件

Radio equipment used in mobile services-General requirements and conditions of measurement
用于移动服务的无线电设备一般要求和测量条件

SJ/Z 9095.1-1987

移动业务无线设备的测量方法第一部分：一般定义和标准测量条件
Methods of measurement for radio equipment used in mobile services--Part 1: General definitions and standard conditions of measurement

IEC 60489-1-1983

Methods of measurement for radio equipment used in the mobile services. Part 1: General definitions and standard conditions of measurement
用于移动业务的无线电设备的测量方法第1部分:一般定义和标准测量条件

DIN IEC 60489-1

Methods of measurement for radio equipment used in the mobile services; part 1: general definitions and standard conditions of measurement
移动服务中使用的无线电设备的测量方法；第1部分:一般定义和标准测量条件

IEC 60489-3-1988

Methods of measurement for radio equipment used in the mobile services. Part 3: Receivers for A3E or F3E emissions
用于移动业务的无线电设备的测量方法第3部分:A3E或F3E排放的接收器

SJ/Z 9095.3-1987

移动业务无线设备的测量方法第三部分：Ａ３Ｅ或Ｆ３Ｅ发射的接收机
Methods of measurement for radio equipment used in mobile services--Part 3: Receivers for A3E or F3E emission

SJ/Z 9095.2-1987

移动业务无线设备的测量方法第二部分：Ａ３Ｅ或Ｆ３Ｅ发射的发射机
Methods of measurement for radio equipment used in mobile services--Part 2: Transimitters for A3E or F3E emissions

BS IEC 60489-2-1991

Radio equipment used in mobile services. Methods of measurement-Transmitters employing A3E, F3E or G3E emissions
用于移动服务的无线电设备测量方法采用A3E、F3E或G3E排放的变送器

IEC 60489-8-1984/AMD1-2000

Amendment 1 to IEC 60489-8 - Methods of measurement for radio equipment used in the mobile services - Part 8: Methods of measurement for antennas and ancillary equipment
IEC 60489-8修改件1——移动业务中使用的无线电设备的测量方法——第8部分:天线和辅助设备的测量方法

IEC 60489-1-1983/AMD2-1999

Amendment 2 - Methods of measurement for radio equipment used in the mobile services - Part 1: General definitions and standard conditions of measurement
修改件2.移动业务中使用的无线电设备的测量方法.第1部分:一般定义和标准测量条件

IEC 60489-1-1983/AMD1-1996

Amendment 1 - Methods of measurement for radio equipment used in the mobile services. Part 1: General definitions and standard conditions of measurement
修改件1——移动服务中使用的无线电设备的测量方法第1部分:一般定义和标准测量条件

DIN IEC 60489-6

Methods of measurement for radio equipment used in the mobile services; selective calling and data equipment; identical with IEC 60489-6:1987
移动服务中使用的无线电设备的测量方法；选择性呼叫和数据设备；与IEC 60489-6:1987相同

IEC 60489-2-1991

Methods or measurement for radio equipment used in the mobile services - Part 2: Transmitters employing A3E, F3E or G3E emissions
移动业务中使用的无线电设备的测量方法.第2部分:采用A3E、F3E或G3E发射的发射机

Radio equipment used in mobile services-Methods of measurement for receivers employing single-sideband techniques (R3E, H3E or J3E)
用于移动服务的无线电设备采用单边带技术（R3E、H3E或J3E）的接收机的测量方法

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统