KS C IEC 60603-3-2020-连接器下面3MHz的印制板用频率 - 第3部分:两件式连接器具有以相同间距2.54毫米（0.100英寸）中心和交错线端子间隔开的接触印制电路板-国家数字标准馆

现行 KS C IEC 60603-3-2020

到馆提醒

收藏跟踪

购买正版

인쇄 기판에 사용되는 3 MHz 이하 주파수용 커넥터 — 제3부: 중앙에 2.54 mm (0.100 in) 간격의 접점과 동일 간격의 지그재그 종단을 가진 기판용 Two-part 커넥터 连接器下面3MHz的印制板用频率 - 第3部分:两件式连接器具有以相同间距2.54毫米（0.100英寸）中心和交错线端子间隔开的接触印制电路板

发布日期： 2020-12-30

该规格适用于与焊锡或无铅纵切（实验室类型等）一起具有暗接点和水接点的正方形、多接点及暗、水印刷基板接头组。所有连接器使用主栅格的相同接触点为2.54毫米（0.100英寸）

이 규격은 땜납 또는 무연 종단(랩 타입 등)과 함께 암접점과 수접점을 가진 정사각형, 다접 점 및 암ㆍ수 인쇄 기판 커넥터 그룹에 적용된다. 모든 커넥터는 2.54 mm(0.100 in)의 기본 그리드를 이용 한 동일 접점

分类信息

发布单位或类别：韩国-韩国标准

ICS分类： 31.220.10电子电信设备用机电元件 - 插头和插座装置、连接器

关联关系

研制信息

相似标准/计划/法规

BS EN 60603-9-1998

Connectors for frequencies below 3 MHz for use with printed boards-Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in)
用于印制板的频率低于3MHz的连接器印制板、背板和电缆连接器用两件式连接器基本网格为2.54毫米（0.1英寸）

BS EN 60603-10-1998

Connectors for frequencies below 3 MHz for use with printed boards-Two-part connectors for printed boards for basic grid of 2,54 mm (0,1 in), inverted type
用于印制板的频率低于3MHz的连接器倒置式2.54毫米（0.1英寸）基本网格印制板用两件式连接器

IEC 60603-11-1992

Connectors for frequencies below 3 MHz for use with printed boards - Part 11: Detail specification for concentric connectors (dimensions for free connectors and fixed connectors)
频率低于3 MHz的连接器用于印刷电路板 - 第11部分:同心连接器的详细规格（自由连接器和固定连接器的尺寸）

BS EN 60603-5-1998

Connectors for frequencies below 3 MHz for use with printed boards-Edge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 mm) spacing
用于印制板的频率低于3MHz的连接器间距为2.54mm（0.1mm）的双面印制板用边缘插座连接器和两件式连接器

UNE-EN 60603-9-2001

Connectors for frequencies below 3 MHz for use with printed boards -- Part 9: Two-part connectors for printed boards, backpanels and cable connectors, basic grid of 2,54 mm (0,1 in).
印制板用频率低于3MHz的连接器第9部分:基本网格为2.54mm（0.1in）的印制板、背板和电缆连接器用两件式连接器

KS C IEC 60603-10

인쇄기판에 사용되는 3MHz 이하 주파수용 커넥터 — 제10부: 반전형 2.54mm(0.1in) 기본 그리드에 사용되는 인쇄기판용 암.수 커넥터
用于频率低于3 Mhz的连接器用于印刷电路板 - 第10部分:2.54 Mm（0.1 In）基本电网印刷电路板的两部分连接器反相型

KS C IEC 60603-5(2019 Confirm)

인쇄 기판에 사용하는 3 MHz 미만 주파수용 커넥터 — 제5부: 간격이 2.54 mm(0.1 in)인 양면 인쇄 기판용, 에지 소켓 커넥터 및 2-part 커넥터
用于频率低于3 Mhz的连接器用于印刷电路板 - 第5部分:双面印刷电路板的边缘插座连接器和两部分连接器带2.54 Mm（0.1 In）间距

IEC 60603-5-1987

Connectors for frequencies below 3 MHz for use with printed boards - Part 5: Edge-socket connectors and two-part connectors for double-sided printed boards with 2,54 mm (0,1 in) spacing
用于印制板使用频率低于3 MHz的连接器 - 第5部分:2.54 mm（0.1 in）间距的双面印制板的边缘插座连接器和两件式连接器

KS C IEC 60603-5(2024 Confirm)

인쇄 기판에 사용하는 3 MHz 미만 주파수용 커넥터 — 제5부: 간격이 2.54 mm(0.1 in)인 양면 인쇄 기판용, 에지 소켓 커넥터 및 2-part 커넥터
印制板用频率低于3MHz的连接器第5部分:2.54mm（0.1in）间距双面印制板用边缘插座连接器和两件式连接器

UNE-EN 60603-5-1999

CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS. PART 5: EDGE-SOCKET CONNECTORS AND TWO-PART CONNECTORS FOR DOUBLE-SIDED PRINTED BOARDS WITH 2,54 MM (0,1 IN) SPACING.
用于印制板的频率低于3MHz的连接器第5部分:间距为2.54毫米（0.1英寸）的双面印制板用边缘插座连接器和两件式连接器

ECA/EIA SP 2940

SECTIONAL SPECIFICATION FOR PRINTED BOARD CONNECTORS OF CERTIFIED QUALITY (FOR FREQUENCIES ESSENTIALLY BELOW 2 MHZ)
质量认证的印制板连接器分规范（频率基本低于2MHz）

BS EN 60603-6-1998

Connectors for frequencies below 3 MHz for use with printed boards-Edge-socket connectors and printed board connectors with 2,54 mm (0,1 in) contact spacing for single or double-sided printed boards of 1,6 mm (0,063 in) nominal thickness
用于印制板的频率低于3MHz的连接器标称厚度为1.6 mm（0063 in.）的单面或双面印制板的接触间距为2.54 mm（0.1 in.）的边缘插座连接器和印制板连接器

BS EN 60603-4-1998

Connectors for frequencies below 3 MHz for use with printed boards-Two-part connectors for printed boards having contacts spaced at 1,91 mm (0,075 in) centres and staggered terminations at that same spacing
用于印制板的频率低于3MHz的连接器印制板用两件式连接器其触点间距为1.91毫米（0075英寸）交错终端间距相同

BS EN 60603-3-1998

Connectors for frequencies below 3 MHz for use with printed boards-Two-part connectors for printed boards having contacts spaced at 2,54 mm (0,100 in) centres and staggered terminations at that same spacing
用于印制板的频率低于3MHz的连接器印制板用两件式连接器触点中心间距为2.54毫米（0100英寸）且交错终端间距相同

IEC 60603-3-1987

Connectors for frequencies below 3 MHz for use with printed boards - Part 3: Two-part connectors for printed boards having contacts spaced at 2,54 mm (0,100 in) centres and staggered terminations at that same spacing
频率低于3 MHz的连接器用于印刷电路板 - 第3部分:印刷电路板的两部分连接器具有间隔2,54 mm（0,100 in）中心的接触点和间隔相同的交错终端

UNE-EN 60603-3-1999

CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS. PART 3:TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING CONTACTS SPACED AT 2,54 MM (0,100 IN) CENTRES AND STAGGERED TERMINATIONS AT THAT SAME SPACING.
用于印制板的频率低于3MHz的连接器第3部分:印制板用两件式连接器其触点间距为2.54毫米（0100英寸）中心交错终端间距相同

BS EN 60603-1-2000

Connectors for frequencies below 3 MHz for use with printed boards-Generic specification. General requirements and guide for the preparation of detail specifications with assessed quality
用于印制板的频率低于3MHz的连接器通用规范质量评估详细规范编制的一般要求和指南

BS EN 60603-14-1999

Connectors for frequencies below 3 MHz for use with printed boards-Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment
印制板用频率低于3MHz的连接器

BS EN 60603-2-1998

Connectors for frequencies below 3 MHz for use with printed boards-Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features
印制板用频率低于3MHz的连接器

BS EN 60603-12-1998

Connectors for frequencies below 3 MHz for use with printed boards-Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits
用于印制板的频率低于3MHz的连接器集成电路用一系列插座的尺寸、一般要求和试验详细规范

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统