本SAE标准涵盖了非金属管和/或任何金属管与非金属管组件的组合的最低要求，这些组件作为液体和/或蒸汽输送系统制造，用于汽油、酒精与汽油的混合物或柴油燃料系统。本SAE标准旨在涵盖在-40℃（-40℉）以上和115℃（239℉）以下运行且最大工作表压为690 kPa（100 psi）的燃油系统任何部分的管组件。峰值间歇温度为115摄氏度（239华氏度）。对于长期连续使用，温度不得超过90摄氏度（194华氏度）。应注意的是，极端温度会以各种方式影响组件，必须尽一切努力确定特定燃料管路组件将暴露的工作温度，并根据其进行设计。 当设计本文件中所述的液体输送和/或蒸汽输送系统时，应参考适用的SAE标准。如果可能或除非另有规定，根据本文件测试的系统应处于最终设计意图配置。

This SAE Standard encompasses the minimum requirements for non-metallic tubing and/or combinations of any metallic tubing to non-metallic tubing assemblies manufactured as a liquid- and/or vapor-carrying systems designed for use in gasoline, alcohol blends with gasoline, or diesel fuel systems. This SAE Standard is intended to cover tubing assemblies for any portion of a fuel system which operates above -40 degrees C (-40 degrees F) and below 115 degrees C (239 degrees F), and up to a maximum working gage pressure of 690 kPa (100 psi). The peak intermittent temperature is 115 degrees C (239 degrees F). For long-term continuous usage, the temperature shall not exceed 90 degrees C (194 degrees F). It should be noted that temperature extremes can affect assemblies in various manners and every effort must be made to determine the operating temperature to which a specific fuel line assembly will be exposed, and design according.The applicable SAE standards should be referenced when design liquid-carrying and/or vapor-carrying systems which are described in this document.Wherever possible or unless stated otherwise, systems tested to this document shall be in the final design intent configuration.