ISO 6806:2017规定了用于油燃烧器的橡胶软管和软管组件的最低要求。 指定了以下两种类型的软管组件。 -类型1:用于焊剂和回流的软管组件，但不用于插入油燃烧器泵和雾化连接之间；最大工作压力1.0兆帕（10巴）；最高油温100°C。 -类型2:用于插入油燃烧器泵和雾化接头之间的软管组件；最大工作压力4.0兆帕（40巴）；最高油温100°C。 未经特殊评估，本文件中规定的软管组件不得用于除油燃烧器安装之外的其他用途。

This document specifies the minimum requirements for rubber hoses and hose assemblies for use in oil burners. The following two types of hose assembly are specified: —     Type 1: Hose assemblies for flux and reflux, but not for insertion between the oil burner pump and the atomizing connection; maximum working pressure 1,0 MPa (10 bar); maximum oil temperature 100 °C; —     Type 2: Hose assemblies for insertion between the oil burner pump and the atomizing connection; maximum working pressure 4,0 MPa (40 bar); maximum oil temperature 100 °C. The hose assemblies specified in this document are not intended to be used, without special assessment, for purposes other than oil burner installations.