Ductile iron pipes, fittings and accessories - External polyethylene coating for pipes - Requirements and test methods
球墨铸铁管、配件和附件.管道用外部聚乙烯涂层.要求和试验方法

2006-06-28

Adhesives for thermoplastic piping systems. Test method for the determination of thermal stability of adhesives
热塑性管道系统用粘合剂 胶粘剂热稳定性测定的试验方法

2003-04-30

Adhesives for thermoplastic piping systems — Test method for the determination of thermal stability of adhesives
热塑性管道系统用粘合剂——胶粘剂热稳定性测定的试验方法

2002-11-26

Plastics piping systems - Polyethylene (PE) valves - Test method for resistance to thermal cycling
塑料管道系统.聚乙烯（PE）阀门.耐热循环试验方法；德文版EN 12119:1997

1997-08-01

Plastics piping systems. Polyethylene (PE) valves. Test method for resistance to thermal cycling
塑料管道系统 聚乙烯（PE）阀门 耐热循环试验方法

1997-12-15

PLASTICS PIPING SYSTEMS. POLYETHYLENE (PE) VALVES. TEST METHOD FOR RESISTANCE TO THERMAL CYCLING.
塑料管道系统 聚乙烯（PE）阀门 耐热循环的试验方法

1997-11-26

塑料管材和管件 聚乙烯（PE）鞍形旁通抗冲击试验方法
Plastics pipes and fittings Polyethylene(PE) tapping tees Test method for impact resistance

2005-03-23

Plastics pipes and fittings — Polyethylene (PE) tapping tees — Test method for impact resistance
塑料管道和配件——聚乙烯（PE）开孔三通——抗冲击性试验方法

1997-12-25

Methods of testing plastics. Thermoplastics pipes, fittings and valves-Resistance to environmental stress cracking of polyethylene pipes and fittings for non-pressure applications
塑料的试验方法 热塑性塑料管、配件和阀门

1989-10-31

Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesive (ISO 15908:2002)
热塑性管道系统用胶粘剂.胶粘剂热稳定性测定的试验方法（ISO 15908-2002）；德文版EN ISO 15908:2002

2003-03-01

Adhesives for thermoplastic piping systems - Test method for the determination of thermal stability of adhesives. (ISO 15908:2002)
热塑性管道系统用胶粘剂.胶粘剂热稳定性测定的试验方法 （ISO 15908-2002）

2003-03-28

微灌用聚乙烯（PE）管材与管件连接密封性试验方法
Test method of leakproofness under internal pressure of joints between polyethylene (PE) fittings and pipes for micro-irrigation

1994-04-06

冷热水用热塑性塑料管道系统 管材管件组合系统热循环试验方法
Thermoplastics piping systems for hot and cold water supply-Test method for the resiance of pipes and fittings mounted assemblies to thermal cycling

2005-11-17

灌溉用聚乙烯（PE）管材由插入式管件引起环境应力开裂敏感性的试验方法和技术要求
Polyethylene (PE) pipes for irrigation laterals - Susceptibility to envionmental stress cracking induced by insert-type fittings - Test method and specification

2006-03-08

Methods of test for plastics pipes and fittings, Method 25: Determination of slow-crack-growth of PE (polyethylene) resins - Notched, constant ligament-stress (NCLS) method
塑料管道和配件的试验方法 方法25:聚乙烯（PE）树脂缓慢裂纹扩展的测定.缺口恒定韧带应力（NCLS）法

2005-09-30

Polyethylene PE 32 and PE 40 pipes for irrigation laterals — Susceptibility to environmental stress cracking induced by insert-type fittings — Test method and requirements
灌溉支管用聚乙烯PE 32和PE 40管道——插入式配件引起的环境应力开裂敏感性——试验方法和要求

2004-06-18

电缆和光缆绝缘和护套材料通用试验方法 第42部分：聚乙烯和聚丙烯混合料专用试验方法 高温处理后抗张强度和断裂伸长率试验 高温处理后卷绕试验 空气热老化后的卷绕试验 测定质量的增加 长期热稳定性试验 铜催化氧化降解试验方法
Common test methods for insulating and sheathing materials of electric and optical cables - Part 42:Methods specific to polyethylene and polypropylene compounds - Tensile strength and elongation at break after conditioning at elevated temperature - Wrapping test after conditioning at elevated temperature - Wrapping test after thermal ageing in air - Measurement of mass increase - Long-term stability test - Test method for copper-catalyzed oxidative degradation

2008-06-26

Общие методы испытаний материалов изоляции и оболочек электрических и оптических кабелей. Часть 4-2. Специальные методы испытаний полиэтиленовых и полипропиленовых композиций. Прочность при растяжении и относительное удлинение при разрыве после кондиционирования при повышенной температуре. Испытание навиванием после кондиционирования при повышенной температуре. Испытание навиванием после теплового старения на воздухе. Измерение увеличения массы. Испытание на длительную термическую стабильность.
电缆和光缆绝缘和护套材料的常用试验方法 第4-2部分 聚乙烯和聚丙烯化合物特有的方法 调理后的拉伸强度和断裂伸长率升高 调理和升温后进行包装测试 空气中热老化后的包装试验 质量增加的测量 长期稳定性试验 铜催化氧化降解试验方法

2011-11-29

전기 및 광케이블의 절연 및 외장 재료－일반 시험 방법－제4－2부：폴리에틸렌 및 폴리프로필렌 화합물에 대한 특별 시험 방법－열처리 후 절단 시 인장 강도 및 신장률－열처리 후 래핑 시험－열 노화 후 래핑 시험－질량 손실 측정－장기간 안정 시험－구리－촉매 산화 노화에 관한 시험 방법
电缆和光缆绝缘和护套材料通用试验方法第4－2部分:聚乙烯和聚丙烯化合物专用试验方法高温处理后的拉伸强度和断裂伸长率高温处理后的缠绕试验热老化后的缠绕试验空气－质量增加的测量－长期稳定性试验－铜催化氧化降解试验方法

2005-09-30

전기 및 광케이블의 절연 및 외장 재료－일반 시험 방법－제4－2부：폴리에틸렌 및 폴리프로필렌 화합물에 대한 특별 시험 방법－열처리 후 절단 시 인장 강도 및 신장률－열처리 후 래핑 시험－열 노화 후 래핑 시험－질량 손실 측정－장기간 안정 시험－구리－촉매 산화 노화에 관한 시험 방법
电缆和光缆的绝缘和护套材料通用试验方法第4－2部分:聚乙烯和聚丙烯化合物专用方法高温处理后的拉伸强度和断裂伸长率高温处理后的缠绕试验热老化后的缠绕试验空气－质量增加测量－长期稳定性试验－铜催化氧化降解试验方法

2005-09-30