首页 馆藏资源 舆情信息 标准服务 科研活动 关于我们
现行 T/ZZB 1890-2020
到馆阅读
收藏跟踪
购买正版
聚氨酯硬质脚轮
发布日期: 2020-11-20
实施日期: 2020-12-01
主要技术内容:本文件规定了聚氨酯硬质脚轮的术语和定义、型式、结构和基本参数、基本要求、技术要求、试验方法、检验规则、标志、包装及贮存和质量承诺。本文件适用于采用回弹性高于50 %的聚氨酯弹性体材料制成的硬质脚轮(以下简称脚轮)
分类信息
关联关系
研制信息
相似标准/计划/法规
现行
KS M 3809
경질 폴리우레탄 폼 단열재
硬质聚氨酯保温泡沫
2020-01-21
现行
BS 4840-2-1994
Rigid polyurethane (PUR) foam in slab form-Specification for PUR foam for use in refrigerator cabinets, cold rooms and stores
平板状硬质聚氨酯(PUR)泡沫
1994-01-15
现行
BS 4840-1-1985
Rigid polyurethane (PUR) foam in slab form-Specification for PUR foam for use in transport containers and insulated vehicle bodies
平板状硬质聚氨酯(PUR)泡沫
1985-06-28
现行
JC/T 1061-2007
铝箔面硬质聚氨酯泡沫夹芯板
Aluminum-foil faced rigid polyurethane foam sandwich panels
2007-09-22
现行
GB/T 30916-2014
喷涂硬质聚氨酯泡沫组合聚醚
Blend polyol for rigid polyurethane foam used in spraying
2014-07-08
现行
QB/T 2904-2007
自结皮硬质聚氨酯泡沫塑料
2007-12-03
现行
GB/T 20219-2015
绝热用喷涂硬质聚氨酯泡沫塑料
Rigid cellular plastics-spray-applied polyurethane foam for thermal insulation
2015-06-02
现行
GB/T 26689-2011
冰箱、冰柜用硬质聚氨酯泡沫塑料
Rigid polyurethane cellular plastics used in refrigerators and freezers
2011-06-16
现行
GB/T 21558-2008
建筑绝热用硬质聚氨酯泡沫塑料
Rigid polyurethane cellular plastics used in the thermal insulation of building
2008-03-24
现行
MIL MIL-P-39500 Notice 1-Inactivation
POLYURETHANE FOAM KIT, RIGID (NO S/S DOCUMENT)
硬质聚氨酯泡沫套件(无S/S文件)
1995-06-21
现行
MIL MIL-P-39500
POLYURETHANE FOAM KIT, RIGID (NO S/S DOCUMENT)
硬质聚氨酯泡沫套件(无S/S文件)
1979-09-05
现行
HG/T 4960-2016
保温板用硬质聚氨酯泡沫组合聚醚
Blend polyol for rigid polyurethane cellular plastics used in insulation panels
2016-04-05
现行
QJ 1128-1987
硬质聚氨酯泡沫塑料喷涂成型工艺
1987-03-07
现行
ULC 705.2
Standard for Thermal Insulation - Spray Applied Rigid Polyurethane Foam, Medium Density - Application
隔热标准.喷涂中等密度硬质聚氨酯泡沫.应用
2020-07-08
现行
CAN/CGSB 51.23-92
Isolant thermique en plastique alvéolaire rigide de polyuréthane pulvérisé
喷涂聚氨酯硬质泡沫塑料保温材料
1992-09-01
现行
GB/T 26700-2011
门体填充用硬质聚氨酯泡沫塑料
Rigid polyurethane(PUR)cellular plastics used for doors filling
2011-06-16
现行
BS 6586-1-1993
Rigid polyurethane (PUR) foam produced by the press injection method-Specification for PUR foam for insulated panels for transport containers and insulated vehicles bodies
采用压力注射法生产的硬质聚氨酯(PUR)泡沫
1993-02-15
现行
GB/T 35453-2017
冻土路基用硬质聚氨酯泡沫板(DLPU)
Rigid polyurethane foam board for frozen soil subgrade(DLPU)
2017-12-29
现行
DB32/T 1718-2011
硬质聚氨酯泡沫中残留发泡济的测定
2011-04-20
现行
GB/T 29288-2012
热塑性硬质聚氨酯泡沫塑料通用技术条件
General requirement for thermoformable rigid polyurethane cellular plastics
2012-12-31