ISO 17456:2006-塑料管道系统——多层管道——长期强度的测定 -国家数字标准馆

现行 ISO 17456:2006

到馆阅读

收藏跟踪

购买正版

Plastics piping systems — Multilayer pipes — Determination of long-term strength 塑料管道系统——多层管道——长期强度的测定

发布日期： 2006-10-03

ISO 17456:2006规定了确定多层管道长期静水压强度的两种替代方法:适用于多层P管道（所有聚合物层）的计算方法和适用于多层P和多层M管道（聚合物和金属层）的试验方法。
它不适用于由一个聚合物应力设计层组成的管道，或具有一个非应力设计的外部聚合物层的管道。

ISO 17456:2006 specifies two alternative methods for determining the long-term hydrostatic strength of multilayer pipes: a calculation method applicable to multilayer P pipes (all polymer layers) and a test method applicable to both multilayer P and multilayer M pipes (polymer and metal layers).
It is not applicable to pipes consisting of one polymeric stress-designed layer or having an outside polymeric layer that is not stress-designed.

分类信息

发布单位或类别：国际组织-国际标准化组织

ICS分类： 23.040.20管道部件和管道 - 塑料管

关联关系

研制信息

归口单位： ISO/TC 138/SC 5

相似标准/计划/法规

GOST R 54867-2011

Трубы полимерные многослойные. Определение длительной прочности
多层塑料管确定长期实力

Plastics piping systems — Multilayer pipes — Determination of the oxygen permeability of the barrier pipe
塑料管道系统——多层管道——阻隔管透氧性的测定

GOST R 55911-2013

Трубопроводы из пластмасс. Многослойные трубы. Определение кислородопроницаемости труб с барьерным слоем
塑料管道系统多层管道隔离管的透氧性测定

BS 03/102175 DC

ISO 17455. Plastics piping systems. Multilayer pipes. Determination of the oxygen permeability of the barrier pipe
ISO 17455 塑料管道系统多层管道阻隔管透氧性的测定

GB/T 40937-2021

塑料管道系统塑料复合管材和管件长期强度的测定方法
Plastic piping systems—Determination of long-term strength for plastic composite pipes and fittings

BS EN 1447-2009+A1-2010

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of long-term resistance to internal pressure
塑料管道系统玻璃纤维增强热固性塑料（GRP）管长期抗内压性的测定

UNE-EN 1447-2009+A1-2011

Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes - Determination of long-term resistance to internal pressure
塑料管道系统.玻璃纤维增强热固性塑料（GRP）管.长期耐内压性的测定

Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
塑料管道系统——用外推法测定管形热塑性材料的长期静水压强度

플라스틱 배관 및 덕트 시스템 — 외삽법에 의한 관 형태의 열가소성 플라스틱 소재의 장기 정수압 강도 측정
塑料管道和管道系统 - 通过外推法测定管材中热塑性塑料材料的长期静水强度

GB/T 18252-2020

塑料管道系统用外推法确定热塑性塑料材料以管材形式的长期静液压强度
Plastics piping and ducting systems — Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation

BS EN ISO 9080-2012

Plastics piping and ducting systems. Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
塑料管道系统用外推法测定管形热塑性材料的长期静水压强度

AS/NZS 1462.29-2019

Methods of test for plastic pipes and fittings, Method 29: Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
塑料管道和配件的试验方法方法29:塑料管道和管道系统.用外推法测定管形热塑性材料的长期静水压强度

UNE-EN 1227-1998

PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF THE LONG-TERM ULTIMATE RELATIVE RING DEFLECTION UNDER WET CONDITIONS.
塑料管道系统玻璃纤维增强热固性塑料（GRP）管潮湿条件下长期极限相对环挠度的测定

BS EN 1227-1998

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the long-term ultimate relative ring deflection under wet conditions
塑料管道系统玻璃纤维增强热固性塑料（GRP）管潮湿条件下长期极限相对环挠度的测定

UNE-EN ISO 9080-2003

Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2003)
塑料管道和导管系统.用外推法测定管形热塑性材料的长期静水压强度（ISO 9080-2003）

BS 10/30180079 DC

BS EN ISO 9080. Plastics piping and ducting systems. Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation
BS EN ISO 9080 塑料管道系统用外推法测定管形热塑性材料的长期静水压强度

BS EN 1225-1996

Plastics piping systems. Glass-reinforced thermosetting plastics (GRP) pipes. Determination of the creep factor under wet conditions and calculation of the long-term specific ring stiffness
塑料管道系统玻璃纤维增强热固性塑料（GRP）管潮湿条件下蠕变系数的确定和长期比环刚度的计算

UNE-EN 1225-1996

PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF THE CREEP FACTOR UNDER WET CONDITIONS AND CALCULATION OF THE LONG-TERM SPECIFIC RING STIFFNESS.
塑料管道系统玻璃纤维增强热固性塑料（GRP）管潮湿条件下蠕变系数的确定和长期比环刚度的计算

JIS K 7035-1998

Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the creep factor under wet conditions and calculation of the long-term specific ring stiffness
塑料管道系统玻璃纤维增强热固性塑料（GRP）管潮湿条件下蠕变系数的测定和长期比环刚度的计算

JIS K 7039-1998

Plastics piping systems -- Glass-reinforced thermosetting plastics (GRP) pipes -- Determination of the long-term ultimate bending strain and calculation of the long-term ultimate relative ring deflection, both under wet conditions
塑料管道系统玻璃纤维增强热固性塑料（GRP）管长期极限弯曲应变的测定和潮湿条件下长期极限相对环挠度的计算

《国家标准化发展纲要》提出建设国家数字标准馆，推动标准化工作向数字化、网络化、智能化转型。中国标准化研究院正在全力推进国家数字标准馆建设，力争在2026年底建成“一个中心”和“一个平台”，即全球领先的标准数据资源中心，涵盖标准全生命周期的数字化、网络化、智能化研究与服务平台。

专题数据库

标准管理系统

大数据分析系统

标准智能研制系统