1.1 本规程涵盖了地板抛光剂的应用，以维护多层复合瓷砖或地板。 2. 地板抛光剂用于多层复合地板，以保护和美化地板表面。清洁、抛光、拆卸和维护程序是该过程中的重要功能。 1.2 以英寸-磅为单位的数值应视为标准值。括号中给出的值仅供参考。 1.3 本标准并非旨在解决与其使用相关的所有安全问题（如有）。本标准的用户有责任在使用前制定适当的安全和健康实践，并确定监管限制的适用性。 ====意义和用途====== 2.1 多层复合瓷砖或地板可由装饰图案层和透明耐磨层组成。一些地板还可能包括应力吸收泡沫层或其他类型的背衬层。 2.2 该组合物中包括适当塑化和稳定的乙烯基树脂，有或没有增强纤维、矿物填料和底漆颜料。金属色调（碎屑、颜料等）经常用于形成整体设计。透明耐磨涂层通常为聚氨酯、丙烯酸或乙烯基。虽然透明耐磨层提供了额外的保护措施，但表面与其他类型的地板一样容易磨损。

1.1 This practice covers the application of floor polishes to maintain multilayer composite tile or flooring. 2 Floor polishes are applied to multilayer composite floors for protection and beautification of the floor surface. Cleaning, polish application, removal, and maintenance procedures are important functions in this process. 1.2 The values stated in inch-pound units are to be regarded as the standard. The values given in parentheses are for information only. 1.3 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. ====== Significance And Use ====== 2.1 Multilayer composite tile or flooring may consist of a decorative pattern layer and a transparent wear layer. Some floors may also include a stress absorbing foam layer or a backing layer of other type. 2.2 Included in the composition are vinyl resins, suitably plasticized and stabilized, with or without fortifying fibers, mineral fillers and prime pigments. Metallic accents (chips, pigments, etc.) are frequently used to form the overall design. The transparent wear coating is usually polyurethane, acrylic or vinyl. Although the transparent wear layer provides an extra measure of protection, the surface is subject to the same wear and tear as other types of floors.